200A MA Output AC Current Probe Nickel Metal Core For Electric Meter Tester

Quick Detail

Package & Delivery Lead Time

Detailed Description

200A High Quanlity ma output AC Clamp on Current Probe for electric meter tester Theory In electrical and electronic engineering, a current probe is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe. Current probes are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamps meters can measure currents of 1000 A and more. Applications The XQ20AC Current Probe is designed for easy installed in tight spaces and without the need for dismantling the primary busbar or cables. The sensing head uses sliding push-fit clamp structure, safety isolation to avoid the user to contact with charged objects directly. It complies with CE standards and meets 600V CAT III safety class. it can measure from 1mA to 240A, class 0.1 with 2.5m cable, good linear & low phase shift, this model XQ20 current probe is the best current clamp in the world. Power quality measuring Large industrial loads Measuring around cable bundles Power load monitoring Waveform analysis Energy meter calibrator Power monitor Phase Angle meter Resistance tester Features Measurement range of 1mA to 200A AC Holding wire diameter: 20mm Improved ergonomic design and easy operation High content nickel metal core Conforms to EN 61010, 600V CAT III Low phase shift for power measurement Load capacity: 4 Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters UL, CE mark PARAMETERS - - - - Electrical parameters Ratio | 1000: 1 or 2000:1 (customized) | Accuracy class | 0.1%, 0.2% | Primary current | 0 - 200A AC | Secondary current | 0 - 200mA AC (customized) | Max. Cont. Input current | 240A | Load capacity | 4 | Over voltage category | CAT III 600V | Output signal (AC current) | From 0 to 200mA AC at nominal input current | Output signal (AC voltage) | From 0 to 2V AC at nominal input current | Frequency range | 40Hz-2000Hz | Dielectric strength | 3KV 50Hz/60Hz at 1minute | Temperature range | -20C to +55C | Output | 2.5 meter cable with D01 connector | Max. voltage not insulated conductors | 600 V | Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 | Installation | Clamp type | Output mode | Lead output(2.5m) | Mechanical parameters Dimensions (L x W x H) (mm) | 52.5 x 137.5 x 28 | Weight (g) | 400 | Holding wire diameter (mm) | 20 | Max. jaw opening (mm) | 20 | Jaw color | Red, yellow, blue, green, black | Material | PC+ABS+Polycarbonate, UL94 V0 | - - - - Photo Dimensions

Basic Company Information

Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.

Company Advantage

Detail Company Introduction