50mm Dia Inductive Current Clamp , 1000A Current Clamp Probe For Oscilloscope

Quick Detail

Package & Delivery Lead Time

Detailed Description

Theory In electrical and electronic engineering, a current clampis an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe. Current clamps are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamps meters can measure currents of 1000 A and more. Applications The round jaw design on the P50 Series AC current clamp along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. Measurement range is 1mA to 1200A. The P50 current clamp is a general purpose 1000A AC current clamp designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P50 has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important. Power quality measuring Large industrial loads Measuring around cable bundles Power load monitoring Waveform analysis Energy meter calibrator Power monitor Phase Angle meter Resistance tester Features Measurement range of 1mA to 1200A AC Large jaw opening accommodates conductors up to two 500kcmil Improved ergonomic design and easy operation High content nickel metal core Conforms to EN 61010, 600V CAT III Low phase shift for power measurement Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters UL, CE mark PARAMETERS - - - - Electrical parameters Ratio | 1000: 1 or 2000:1 (customized) | Accuracy class | 0.1%, 0.2%, 0.5% | Primary current | 0 - 1000A AC | Secondary current | 1mV/A AC, 5mV/A or (customized) | Max. Cont. Input current | 1200A | Over voltage category | CAT III 600V | Output signal (AC current) | 333mV, 500mV,1V,2V,5V AC at nominal input current | AC Accuracy(1000A Range) 0-10A | 0.5% | 10-100 | 0.2% | 10-1200A | 0.1% | AC Phase Shift(1000A Range) 0-10A | 0.5 | 10-100 | 0.2 | 10-1200A | 0.1 | Frequency range | 40Hz-2000Hz | Dielectric strength | 3KV 50Hz/60Hz at 1 minute | Temperature range | -20C to +55C | Output | 2.5 meter cable with D01 connector | Max. voltage not insulated conductors | 600 V | Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 | Installation | Clamp type | Output mode | Lead output (2.5m) | Mechanical parameters Dimensions (L x W x H)(mm) | 102.9 x 219.6 x 28 | Weight (g) | 550 | Holding wire diameter (mm) | 50 | Max. jaw opening (mm) | 50 | Color | Gray or blue | Material | PC+ABS+Polycarbonate, UL94 V0 | - - - -

Basic Company Information

Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.

Company Advantage

Detail Company Introduction