Carbon Steel 45 Elbow JIC Flare Fittings , Bulkhead JIC 37 Degree Hydraulic Fittings

Quick Detail

Package & Delivery Lead Time

Detailed Description

45 Elbow JIC Male37 Cone and JIC Male37 Seat Flared Fittings by carbon steel Tolerance: In the manufacturing process, due to the influence of processing or measurement, the actual size of the finished product always has a certain error. In order to ensure the interchangeability of parts, the actual size of the parts must be controlled within the allowable range. The allowable dimensional variation is called dimensional tolerance. Cases: 1, the basic size design, given size: 30mm 2, the limit size allows two dimensional variations of the limit value: Maximum limit size =30+0.01=30.01mm Minimum limit size =30-0.01=29.99mm 3, the algebraic value of the limit deviation, the minimum size, and the basic dimension. That is, the algebraic difference between the maximum limit size and the minimum limit size and the basic dimension are the upper and lower deviations, collectively the limit deviations. The upper and lower deviations of the hole are expressed in capitals ES and EI, respectively: Upper deviation ES=30.01-30=+0.01 Lower deviation EI=29.99-30=-0.01 4, dimensional tolerances allow the amount of variation in size, i.e., the maximum limit size, the minimum limit size, and the algebraic difference between the upper and lower deviations. Dimensional tolerance is an absolute value without symbols. Tolerance: 30.01-29.99=0.02 Or I0.01- (-0.01) =0.02 - - - - 1.Swaged Metric Fittings | Mertic Flat Seal Fittings | Metric Multiseal Fittings | Metric 60Cone Seal Fittings | Metric 74Cone Seal Fittings | Metric 24Cone O-RING Seal L..T Fittings | Metric 24Cone O-RING Seal H.T.Fittings | Metric Standpipe Straight Fittings | JIS Metric 60Cone Seal Fitting | 2. Swaged British Fittings | BSP O-RING Seal Fittings | BSP Flat Seal Fittings | BSP Multiseal Fittings | BSP 60Cone Seal Fittings | BSPT Fittings | JIS BSP 60Cone Seal Fittings | 3. Swaged American Fittings | SAE O-RING Seal Fittings | ORFS Flat Seal Fittings | NPSM 60Cone Seal Fittings | JIC 74Cone Seal Fittings | NPT Fittings SAE Flange L.T. Fittiings | SAE Flange H.T.Fittings | 4. Staplelok Fittings | Banjo Double connection | interlock Hose Fittings | 5. Ferrule | FERRULE for SAE100R1AT/ EN 853 1SN HOSE | FERRULE for SAE100R1A EN 853 1ST HOSE | FERRULE for SAE100R2AT/DIN20022 2SN HOSE | FERRULE for SAE100R2A/EN 853 2SN HOSE | FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC | FERRULE for 4SP,4SH/10-16,R12-06-16 HOSE | FERRULE for 4SH,R12/32 HOSE | 6. Metric Adapters | Metric Thread O-RING Face Seal Adapters | Metric Thread Bite Type Tube Adapters | JIS Metric Thread 60Cone Adapters | Metric Thread 74Cone Flared Tube Adapters | 7. British Adapters | BSP Thread 60Cone Adapters | JIS BSP Thread 60Cone Adapters | BSPT Thread Adapters | 8. American Adapters | ORFS Adapters JIC 74Cone Flared Tube Adapters | NPT Thread Adapters | - - - - Product Description - - - - | Thread | WINNER PART NO. | PART NO. | 1 | 2 | A6GJ-07-07 | 7/16"-20 | 7/16"-20 | 2J4-04 | A6GJ-08-08 | 1/2"-20 | 1/2"-20 | 2J4-05 | A6GJ-09-09 | 9/16"-18 | 9/16"-18 | 2J4-06 | A6GJ-12-12 | 3/4"-16 | 3/4"-16 | 2J4-08 | A6GJ-14-14 | 7/8"-14 | 7/8"-14 | 2J4-10 | A6GJ-17-17 | 1.1/16"-12 | 1.1/16"-12 | 2J4-12 | A6GJ-21-21 | 1.5/16"-12 | 1.5/16"-12 | 2J4-16 | A6GJ-26-26 | 1.5/8"-12 | 1.5/8"-12 | 2J4-20 | A6GJ-30-30 | 1.7/8"-12 | 1.7/8"-12 | 2J4-24 | - - - -

Basic Company Information

YUYAO DUOLI HYDRAULICS COMPANY

Company Advantage

Detail Company Introduction