220V Anti Noise Wall Cold Roll Forming Machine Heat Steel Plate 6m Length 3-8m/min

Quick Detail

Package & Delivery Lead Time

Detailed Description

Equipment structure Auto De-coiler---Leveler---Servo-fedder-1---Punching----Servo-fedder-2---Punching edges---Roll Forming---Cutting---Collection Technical Parameter: - - - - No. | Item | Parameter | 1 | Forming Machine Power | 22 kw | 2 | Oil Pump Pressure | 200 MPa | 3 | Speed of rolling | 3-8m/min | 4 | Length | 6m | 5 | Material | Cold and heat steel plate | 6 | Thickness | 3.0 mm | 7 | Width | 480 mm | 8 | Diameter of Axis | 72 | 9 | Quantity of Roller | 14Groups | 10 | Main Power | 50 kw | 11 | Power Supplier | 3 Phase 4 Lines AC380V 50HZ | 12 | Control Voltage | 220 V | 13 | Air pressure | 0.5-0.7 MPa | - - - - General structure of equipment De-coiler Technical parameters Width of material sheet: 6001050mm Thickness of material sheet: 1.5mm(alufer)/1.0mm(Galvanized sheet) Inner diameter: 508mm Range of expanding: 480-520 mm Maximum outer diameter: 1200mm, loading: 6T Motor power:7.5kw Frequency Motor Speed:0-10m/min,adjustable Leveler Working rollers:13+2 Rollers Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller, the clamping roller may the independent control, the leveler has one pair of horizontal guide roller and two pairs of vertical guider roller and easy to adjust by hand wheel. Between the leveler and the feeding device, there is optical sensor, sends out the feedback signal to the control system, the control system sends out the instruction to the frequency conversion motor to change speed to control the storage quantity of the sheet.Achieves the uninterrupted level goal. Servo feeder device-1 and Punching/screeding device Function:it can finish punching of front and screeding of back Servo feeder device-1 Function:material feeding Punching/screeding device We take high speed punching press:JM31G-200 Punching step:152mm Punching stroke:120 strokes/min Combined punching mould:material Cr12MoV Punching step:62~400mm Punching row number:8 rows Punching strokes:110120 strokes/min Punching mould:Punching/cutting,Pneumatic core pulling mould,Material:SKT11, Punching mould service life:two million times(about 50000-70000 work piece),Punching mould can finish three hundred thousand times after milled. Servo Feeder Device-2 and Hydraulic punching edges device Function:It can finish punching edges of front and back sheet Function:feed material Motor:380V 3KW 4 phases,air compressor is additional(pressure 0-0.6MPa.,0.5m3/min) Four Column Hydraulic Punching Frame It finishes edges by hydraulic punching device Roll Forming Machine Amount:2 sets(Note:Front sheet:1 set Back Sheet:1 set) Working type:One production line has 2 sets roll forming machine.The roll forming machine can move according to your actual production demands. Machine structure:Cantilever Type Forming Stations:16 stations(roller station) Finished products:Front and back sheet of Noise barrier Forming frame:wall type frame Max. Feeding width: 1050mm Max. Feeding thickness:0.8~1.5mm(alufer sheet) Roll Forming Machine Amount:2 sets(Note:Front sheet:1 set Back Sheet:1 set) Working type:One production line has 2 sets roll forming machine.The roll forming machine can move according to your actual production demands. Machine structure:Cantilever Type Forming Stations:16 stations(roller station) Finished products:Front and back sheet of Noise barrier Forming frame:wall type frame Max. Feeding width: 1050mm Max. Feeding thickness:0.8~1.5mm(alufer sheet) Roller axis:60 mm Material of the roller:Gcr15,quenching treatment,HRC58-62 Main drive motor:5.5kw Frequency servo-motor Cutting Device Roll Forming Machine Amount:2 sets(Note:Front sheet:1 set Back Sheet:1 set) Working type:One production line has 2 sets roll forming machine.The roll forming machine can move according to your actual production demands. Machine structure:Cantilever Type Forming Stations:16 stations(roller station) Finished products:Front and back sheet of Noise barrier Forming frame:wall type frame Max. Feeding width: 1050mm Max. Feeding thickness:0.8~1.5mm(alufer sheet) Roller axis:60 mm Material of the roller:Gcr15,quenching treatment,HRC58-62 Main drive motor:5.5kw Frequency servo-motor Cutting Device Structure:Hydraulic shear cutting Feature:Cutting is placed behind the forming machine.The material fo cutter is Cr12MoV.Shear fracture without burrs and the cutting tool service life is long, quick change, very convenient to adjust the shearing clearance .

Basic Company Information

Jiangyin Bosj Science Technology Company

Company Advantage

Detail Company Introduction