Quick Detail
Place of Origin
Brand Name
HONGYING
Model Number
customize
HS-CODE
82-
Package & Delivery Lead Time
Package
protective film for each piece, then each bundle i
Delivery Lead Time
Within 15-25 days after receive deposit and and moulds are passed.
Detailed Description
Aluminum alloy that in good lithium aluminum alloy Aluminium Industrial Profile
- - - -
Product Specification |
Description | Aluminum alloy that in good lithium aluminum alloy Aluminium Industrial Profile |
Implements National Standard | GB5237.6-2012 |
Material Thickness(t) | t=1.0 / 1.1 / 1.2 mm |
Surface Texture | Anodizing; Electrolytic coated; Power coated; PCDF coated; Timben texture |
Material | Aluminum Alloy 6063, 6060. 6005, 6005A, etc |
Annealing Treatment | F, T1, T4, T5, T6, T61, T64, etc |
Color | All color |
Longitudinal anti-shearing value | >=24N/mm |
Features | With both heat insulation system, the products are environment protected and with corresponding glass, the value canbe<=207W/M2.K |
Length | Normal length 6m |
Package | 1. Pearl cotton foam for each profile; 2. Wrap with shrink film exterior; 3. Packed according to customer request. |
Advantages/Features | Providing colorful products with various mechanical performances to adapt all kinds of architectural styles |
- - - -
Aluminium Profile Processing:
________________________________________________________________
Raw material purchase--Extruding--Put in semi-finished products warehouse--after the acid and alkali chemical reation--Natural anodized--Air driving--Packaging--Saved in finished products warehouse
Chemical composition
- - - -
Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti |
6063 | 0.2~0.6 | 0.45~0.90 | <0.35 | <0.10 | <0.10 | <0.10 | <0.10 | <0.10 |
| | | | | | | | |
6061 | 0.4~0.8 | 0.80~1.2 | <0.70 | 0.15~0.4 | <0.15 | <0.25 | 0.04~0.35 | <0.15 |
| | | | | | | | |
- - - -
FAQ For Saving Your Precious Time!
Q1. You are a trading company or manufacturer?
-We are manufacturer, and have our own factory.
Q2. Can you do OEM?
-Yes, we can. OEM is welcomed.
Q3. What is your sample policy?
-We offer free samples, and the buyer takes responsibility of the express charge.
Q4. How long will it take to prepare samples?
-Within 15 working days.
anodization
Cleaning after oxidation: at least four times of washing. The PH value of the first tank should be lower or lower, and the second slot ph5-7, close to neutral, to prevent the influence of the aluminum hydroxide deposition in the membrane hole. Three, four gutters should be cleaned with flowing water (pure water), ensure product cleaning thoroughly and prevent acid water from being brought into the back sequence bath, and accelerate the aging or deterioration of the tank. After four water cleaning, the white products can be sealed directly. The dyed products should be washed twice more.
Cleaning after dyeing: it should be washed twice, wash the remaining dye on the surface of the product, reduce the impurities in the closed slot, extend the service life of the closed slot, and stabilize the PH value. It is not necessary to wash the water twice, depending on the workload. Note: in fact, many people don't pay much attention to the cleaning after dyeing, which causes the enclosed slot impurities to be too high. When closed, it is adsorbed on the surface of the product. It is difficult to clean after sealing, and the surface of the product is dirty.
After closed cleaning: after twice washing, add hot pure water to soak. The closed water is mainly used to wash the sealing liquid of the product and the impurities of the surface adsorption. Hot and hot pure water mainly achieves fast drying effect.
0 likes
China [CN] 
Click enlarge Image