Aftermarket A200 Hud Mercedes Benz Heads Up Display , Mercedes Glc Head Up Display

Quick Detail

Package & Delivery Lead Time

Detailed Description

Universal Mini Head Up Display A200 3.5 Inch HUD Compatibility for OBD2 Cars Basic display information 1. Buzzer (Long time pull down the wave button to turn off the alarm sound,do it again to turn on) 2. Speed,water temperature,voltage(Short press in the wave button can switch these information) 3. RPM (1 icon means 200r) 4. Speed Unit at MPH 5. Speed Unit at KM/H 6. Light sensor (Automatically adjust the brightness according to the environment ) 7. Voltage icon 8. Fatigue driving alarm icon 9. Water temperature icon HUD installation 1. Know your vehicle brand,HUD work for cars with OBDII agreement or EU OBD agreement. Open the engine hood and find the sticker below it (see the below picture 1), if it has words like OBDII CERTIFIED, then it can be installed. 2 Find out the 16 pin diagnostic link (see the below picture 2) of the vehicle and connect it well with OBDII connecting line. Parameter forobd2 HUD HUD screen size:90x54x12mm HUD weight: 40g one box size:17x13x4.5cm one box weight:205g HUD button function Vertically Short press-in the setting button: switch for water temperature, voltage, and speed. Pull down the setting button for 5s: turn off/on the alarm sound. Reset setting:When the HUD turns off,long press-in the setting button and at the same time turn on the HUD,all the lights will be on,and then release the button,the reset finished. Clear the fault code:Turn on the HUD and waiting for it scans the OBD2 program successfully,long pull up the setting button,full screen will be on, it means clear the fault codes completed.Long pull up the button again to exit Package Accessories: 1. car HUD body 2. 1.8m OBD connection line 3. windshield reflection film 4. non-slip mat 5. English Manual When use HUD, you may meet below problem 1.Inaccurate Speed a. First check the speed unit is correct or not, the speed unit including KM/H and MPH, short press in the wave button to switch between KM/H and MPH b. When HUD is power on,vertical press the setting button for 5 seconds to enter into the menu options, find menu 1,the parameter shows 107,up or down the setting button to increase or decrease the value according to the difference until it shows correct one.After adjustment, vertical press in 5 seconds to save it. 2.HUD setting for ASS(Automatic start/stop system) The default value for HUD shutdown time is 10 seconds,when the car is gas-electric hybrid and automatic start/stop system, you can delay the shutdown time in menu 10(from10 seconds extend to 180 seconds.)If still cannot work,please set the the power on voltage at 13.2v or 13.6v,which means the the HUD will turn off when the car voltage is less then 13.2v 3. HUD cannot power off or HUD can power off but re-start Change the menu 9 value to any of one between 13.2V and 140V

Basic Company Information

Shenzhen Wins Novelty Technology Co., Ltd.

Company Advantage

Detail Company Introduction