HVTS-HP series | Mobile high-power high-voltage test systems
0 likes
Ukraine, CIS [UA] The HVTS-HP series systems are designed for high-voltage testing of various dielectrics with DC or AC voltage (DC ≤ 140 kV; AC ≤ 100 kV, f = 50 Hz).
The systems could be used in the field or for laboratory testing.
VERSATILITY
The system features both DC (rectified) and AC output voltage modes, which allows to use a single HVTS-HP system for testing such electrical equipment as cables, current transformers, switchgear, sectionalizing joints, etc. according to various standards and regulation.
HIGH POWER
The power output of HVTS-HP series systems ("HP" means "High Power") is several times higher than that of its analogues.
The output current and voltage at the test object can reach 175 mA/100 kV and 80 mA/140 kV in AC and DC modes respectively.
DIGITAL CONTROL
HVTS-HP systems feature a digital graphic display indicating all the test settings and operating parameters.
Digital user interface enables HVTS-HP to feature a multi-language menus, as well as viewing test reports, saving test pre-sets, etc.
MANUAL AND AUTOMATIC CONTROL MODES
The system allows to carry out tests in both fully automatic and manual control modes.
In the manual mode, the output voltage level and ramp up rate are controlled by the operator via a rotary encoder.
In the automatic mode, the test voltage is automatically increased at pre-defined ramp up rate and is held on the required level before being reduced to zero upon completion of the test cycle.
Switching between control modes is done by simple push of a button.
MOBILITY
Light weight, compact size and trolley-form design of both units of the system enable rapid deployment, quick reconnection and operational comfort during the field testing.
SAFETY
The system consists of two separate modules: the control unit and the high voltage unit.
The test process is controlled from the control unit while an object under test is connected to the high-voltage unit.
Such two-module design allows an operator to remain at a safe distance away from the high-voltage circuit and the object under test.
HVTS-HP-Series High Power Test Systems
http://www.kep.ua/en/device/79/hvts-hp-ac-dc-high-voltage-test-system/ The HVTS-HP-Series High Power Test Systems are used for AC and DC high-voltage testing of objects with low to medium electric capacitance such as power cables and accessories, switchgears, surge arresters, bus-bars, and insulators.
Click enlarge Image