Non-autoclaved aerated blocks cellular lightweight concrete clc brick making machine

Yixiang Non-autoclaved Aerated Concrete Blocks Production Line Program can make a large use of fly ash, slag, stone powder and other wasted materials to produce new-type wall materials. Raw materials are easily obtainable in every place, and are wasted materials. No autoclaving is needed during whole production process, no emitting waste water, waste gas and waste solid. Low investment, fast reward, easy operation, and blocks forming period is short, easy curing, significantly increase investment to build factory and cost of product, profit margin is large, reduced contamination the waste materials caused to environment. This program truly integrates economic benefits, social benefits and environmental benefits.

1. Raw materials are in wide range, cost is lowNot only fly ash, slag, sand, stone powder, lime, construction waste, etc can be used with our company's technology and machines to produce Non-autoclaved aerated concrete blocks, but also waste-utilization rate can reach 70%, raw materials are in wide range, no consumption of coal, low consumption of electric power, high automation level, workforce required is few, production cost is largely reduced meanwhile quality and strength of product will not decline.

2. Low investment, quick rewardTraditional autoclaved aerated concrete blocks require investments of more than 3 million US dollars.However the production technology and machines are only 150,000 to 300,000 US dollars. Establishing factory is very easy, required land area is small, going into production after installation is fast, only one month is needed to go into production after installation, the investments is only within 20% of autoclaved aerated blocks factory. And that the most technical parameters of non-autoclaved aerated concrete blocks transcend the traditional autoclaved aerated concrete blocks, and reach national technical standard.

3. Low carbon & environmental friendly, energy saving & reducing emissionNo burning and no autoclaving during the whole production process, no carbon emitting, no pollution, no waste water and waste residue, true green energy saving & environmental friendly construction materials.

4. High technologyThe manufacturing techniques and special technology researched and developed by our company, enhanced strength indexes(3.0~4.0Mpa) meanwhile improved waste utilization rate(70%), largely decreased cost, raised threshold that allows competitors enter into this industry and make competitors unable to and unallowed to imitate, effectively protected the market space and benefits of our company's product.

5. Easily start up businessAdopt the method of overall output and support during whole process, design plan of building factory specifically suitable for you, guide construction on site, install and adjust machines, provide product formula and full sets of manufacturing techniques & procedure, provide operation training, leave no anxiety after building factory to entrepreneur.

Mixing Machine & Pouring

Mold Case

Mold Disengaging Machine

Overturning Machine

Cutting Blocks Machine

There are two types of aerated concrete blocks in the market, one type is Autoclaved Aerated Concrete Blocks, which is featured of big and long autoclave reactors, the other type is Non-autoclaved Aerated Concrete Blocks, which needs far less investment than the Autoclaved Aerated Concrete Blocks.Non-autoclaved aerated concrete blocks is a kind of lightweight porous silicate product, its main raw materials are siliceous materials(sand, fly ash and silicon-containing gangue, etc.) and calcareous materials(lime, cement), added with aerating agent(aluminum powder), produced through process of batching, mixing, pouring, precuring, cutting, curing. The existing construction heat preservation wall blocks, which contains a small number of cement and lime, its strength is mainly produced from hydrate crystal formed by steam heating and curing. While non-autoclaved aerated concrete blocks, its strength is produced from natural curing of cement, without need of autoclaving, so it is called non-autoclaved aerated concrete blocks.

Technical Parameters of Non-autoclaved Aerated Concrete Blocks