Non Toxic Ultra High Molecular Weight Polyethylene Sheet Synthetic Ice Rink Board

Quick Detail

Package & Delivery Lead Time

Detailed Description

Non-toxic White UHMW-PE Synthetic Ice Rink Board for Outdoor and Indoor usage Ultra high molecular weight polyethylene synthetic ice board produced by our company is improved the limitation that people only can skating under normal conditions in winter, and solved the problems of high cost of real ice rink and difficult maintenance. So the product makes it possible for skating loving people to skating freely throughout the year and 24 hours a day. Advantages 1. Compared with the real ice field, the construction cost of the synthetic ice field is only about 1/4 of the real one. 2. The synthetic ice field is not limited by site size, location, and environment. Installation is quick and convenient. Both indoor and outdoor are available. 3.You can skating for four season. 4. Environment friendly, no pollution, no noise, recyclable. 5.The unique system of no roof boarding board is easy to install and disassemble. After the demolition, the ground is as good as ever. 6. According to the market and operating conditions, you can adjust the ice area at any time. Technical Paremeter - - - - General properties | Value | Units | Test | Density | 0.93 | g/cm3 | DIN EN ISO 1183-1 | Flammability | HB/HB | 3 mm / 6 mm | UL 94 | Absorption of moisture | <0.01 | % | DIN EN ISO 62 | Mechanical properties | Yield stress/ tensile strength | 20 | MPa | DIN EN ISO 527 | Tensile elongation | >200 | % | DIN EN ISO 527 | Tensile modulus of elasticity | 680 | MPa | DIN EN ISO 527 | Shore hardness | 63 | Skala D | DIN EN ISO 868 | Thermal properties | Melting temperature | 135 | oC | ISO 11357-3 | Thermal conductivity | 0.4 | W / (m K) | DIN 52612-1 | Specific thermal capacity | 1.9 | kJ / (kg K) | DIN 52612 | Coefficient of linear thermal expansion | 150-230 | 10-6 K-1 | DIN 53752 | Service temperature, long term (min.) | -250 | oC | Benchmark | Service temperature, long term (max.) | 80 | oC | Benchmark | Service temperature, short term | 130 | oC | Benchmark | Heat deflection temperature | 79 | oC | DIN EN ISO 306 (Vicat B) | Electrical properties | Dielectric constant | 2.3 | | DIN IEC 60250 | Dielectric dissipation factor | 1x10-4 | | DIN IEC 60250 | Specific volume resistivity | >1014 | cm | DIN IEC 60093 | Surface resistivity | >1014 | | IN VDE 0303-3 | Comparative tracking index | 600 | | DIN EN 60112 | | | | | (test solution A) | | | | Dielectric strength | 45 | kV/mm | DIN EN 60243 | - - - -

Basic Company Information

Hongda Engineering Plastics Factory

Company Advantage

Detail Company Introduction