3Mm 5mm 3 Pins Round Lamp Led Common Anode Hyper Red & Pure Green Traffic Light

Quick Detail

Package & Delivery Lead Time

Detailed Description

3Mm 5mm 3 Pins Round Lamp Led Common Anode Hyper Red & Pure Green Traffic Light # Features: # 5mm standard T-1 3/4 type. # Bi-color: Hyper Red & Pure Green. # Uniform light output. # Low power consumption. # I.C. Compatible. # Long life-solid state reliability. # The product itself will remain within RoHS compliant Version. # Descriptions: # The Hyper Red source color devices are made with AlGaInP on N-GaAs substrate Light Emitting Diode. # The Pure Green source color devices are made with InGaN on Sapphire substrate Light Emitting Diode. # Applications: # TV set. # Monitor. # Telephone. # Computer. # Circuit board, etc. Package Dimension: - - - - Part No. | Chip Material | Lens Color | Source Color | DL-509SRPGMA-1SR-1PG-A | R | GaAlAs | Water Clear | Hyper Red | G | GaP | Pure Green | - - - - # Absolute Maximum Ratings at Ta=25 - - - - Parameters | Symbol | Max. | Unit | Power Dissipation | Hyper Red | PD | 60 | mW | Pure Green | 95 | Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) | IFP | 100 | mA | Forward Current | Hyper Red | IF | 25 | mA | Pure Green | IF | 25 | mA | Reverse Voltage | VR | 5 | V | Electrostatic Discharge (HBM) | Hyper Red | ESD | 2000 | V | Pure Green | 400 | Operating Temperature Range | Topr | -40 to +85 | Storage Temperature Range | Tstg | -40 to +100 | Lead Soldering Temperature [4mm (.157) From Body] | Tsld | 260 for 5 Seconds | - - - - Electrical Optical Characteristics at Ta=25 - - - - Parameters | Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition | Luminous Intensity * | IV | Hyper Red | 300 | 500 | --- | mcd | IF=20mA (Note 1) | Pure Green | 1000 | 2000 | --- | Viewing Angle * | 21/2 | Hyper Red | --- | 60 | --- | Deg | IF=20mA (Note 2) | Pure Green | --- | 60 | --- | Peak Emission Wavelength | p | Hyper Red | --- | 632 | --- | nm | IF=20mA | Pure Green | --- | 520 | --- | Dominant Wavelength | d | Hyper Red | --- | 624 | --- | nm | IF=20mA (Note 3) | Pure Green | --- | 525 | --- | Spectral Line Half-Width | | Hyper Red | --- | 20 | --- | nm | IF=20mA | Pure Green | --- | 35 | --- | Forward Voltage | VF | Hyper Red | 1.80 | 2.20 | 2.80 | V | IF=20mA | Pure Green | 2.80 | 3.30 | 3.80 | Reverse Current | IR | Hyper Red | --- | --- | 10 | A | VR=5V | Pure Green | --- | --- | 10 | - - - - Notes: # Luminous Intensity Measurement allowance is 10%. # 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. # The dominant wavelength (d) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. # Typical Electrical / Optical Characteristics Curves # (25 Ambient Temperature Unless Otherwise Noted) Hyper Red:PureGreen: The reliability of products shall be satisfied with items listed below: Confidence level: 90%. LTPD: 10%. 1) Test Items and Results: - - - - Test Item | Standard Test Method | Test Conditions | Note | Number of Damaged | Resistance to Soldering Heat | JEITA ED-4701 300 302 | Tsld=2605, 10sec 3mm from the base of the epoxy bulb | 1 time | 0/100 | Solder ability | JEITA ED-4701 300 303 | Tsld=2355, 5sec (using flux) | 1time over 95% | 0/100 | Thermal Shock | JEITA ED-4701 300 307 | 0~100 15sec, 15sec | 100 cycles | 0/100 | Temperature Cycle | JEITA ED-4701 100 105 | -40~25~100~25 30min,5min,30min,5min | 100 cycles | 0/100 | Moisture Resistance Cycle | JEITA ED-4701 200 203 | 25~65~-10 90%RH 24hrs/1cycle | 10 cycles | 0/100 | High Temperature Storage | JEITA ED-4701 200 201 | Ta=100 | 1000hrs | 0/100 | Terminal Strength (Pull test) | JEITA ED-4701 400 401 | Load 10N (1kgf) 101sec | No noticeable damage | 0/100 | Terminal Strength (bending test) | JEITA ED-4701 400 401 | Load 5N (0.5kgf) 0~90~0 bend 2 times | No noticeable damage | 0/100 | Temperature Humidity Storage | JEITA ED-4701 100 103 | Ta=60, RH=90% | 1000hrs | 0/100 | Low Temperature Storage | JEITA ED-4701 200 202 | Ta=-40 | 1000hrs | 0/100 | Steady State Operating Life | | Ta=25, IF=30mA | 1000hrs | 0/100 | Steady State Operating Life of High Humidity Heat | | Ta=60, RH=90%, IF=30mA | 500hrs | 0/100 | Steady State Operating Life of Low Temperature | | Ta=-30, IF=20mA | 1000hrs | 0/100 | - - - - 2) Criteria for Judging the Damage: - - - - Item | Symbol | Test Conditions | Criteria for Judgment | Min. | Max. | Forward Voltage | VF | IF=20mA | --- | F.V.*)1.1 | Reverse Current | IR | VR=5V | --- | F.V.*)2.0 | Luminous Intensity | IV | IF=20mA | F.V.*)0.7 | --- | - - - - *) F.V.: First Value. # Please read the following notes before using the product: # 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260 for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 5. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded. Company introduction: HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures. why choose DOUBLE LIGHT? 1. Well-known chip material 2. 99.99% gold wire bonding 3. 3 years warranty 4. Over 10 years work experience technical service team 5. 24 hours service Professional sales team 6. Free Sample is available 7. Fast delivery 8.100% QC inspection Before Shippment 9. Aiming at the consult of "high quality, zero defect, give you the best quality, best service. Various shipping to meet all kinds of customers requirement! Cetifications to guarantee each items's quality! Choose DOUBLE LIGHT, your expert LED components nearby!

Basic Company Information

HongKong Double Light Electronics Technology Company

Company Advantage

Detail Company Introduction