SK6812 LED 5050 SMD RGB adressable full color Chip ;with built-in chip;1000pcs/bag
0 likes
China [CN] Specifications:
| Model | SK6812 RGB LED Chip |
| Chip Color | White/Black |
| Power Supply Voltage | +3.5- 5.3V |
| Input Voltage | -0.5~VDD+0.5 V |
| Red Wavelength | 620~630 nm |
| Green Wavelength | 515~530 nm |
| Blue Wavelength | 465~475 nm |
| Red luminous intensity(20mA) | 700-1000 mcd |
| Green luminous intensity(20mA) | 2000-3000mcd |
| Blue luminous intensity(20mA) | 1000-1500 mcd |
| Dimension | 5.0*5.0*1.6mm |
Features:
SK6812 is a set of smart control circuit and a light emitting circuit in one of the controlled LED source. The outer type is the same with a 5050LED chip, each element is a pixel. Pixels contained within the intelligent digital interface data latch signal shaping amplification circuit,power supply circuit, a built-in constant current circuit, high precision RC oscillator, the output is driven by the patented PWM technology,effectively guarantee the pixels in the color of the light high consistency. Data protocol using unipolar NRZ communication mode, the pixel is reset after the end of DIN, accept the data transmitted from the controller to the 24bit, the first to send data by the first pixel to pixel extraction, internal data latch, the remaining data after the internal plastic the processing circuit after shaping amplification through the DO port output began to turn to the next cascade of pixels, each pixel through a transmission signal, reduce. Pixel using automatic shaping forwarding technology, makes the number of cascade without signal transmission limit of the pixel, only limited signal transmission speed.The LED has a low driving voltage, environmental protection and energy saving, high brightness, scattering angle, good consistency, low power,long life and so on. The control circuit is integrated in the LED above,more simple circuit, small volume, easy installation.
Description:
Top SMD internal integrated high quality external control line serialcascade constant current IC;1.control circuit and the RGB chip in SMD 5050 components, to form acomplete control of pixel, color mixing uniformity and consistency;2.built-in data shaping circuit, a pixel signal is received after waveshaping and output waveform distortion will not guarantee a line;3.The built-in power on reset and reset circuit, the power does not work;4.gray level adjusting circuit (256 level gray scale adjustable);5. red drive special treatment, color balance;6. line data transmission;7. plastic forward strengthening technology, the transmission distancebetween two points over 10M;8.data transmission frequency up to 800Kbps, when the refresh rate of 30frames per second, a cascade of not less than 1024;9. built-in powerpolarity protection module, powerpolarity will not damage.
Main Application Field:● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical
Click enlarge Image