3.0mm Low Insertion 24x Lanes MTP Female Fiber Optic OS2 Singlemode Trunk Yellow Cable

Quick Detail

Package & Delivery Lead Time

Detailed Description

3.0mm Low Insertion 24x Lanes MTP Female Fiber Optic OS2 Singlemode Trunk Yellow Cable Technical Information: SINO's MTP Trunk Multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data center and other high fiber environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP Fan Outs, spanning MDA, HDA and EDA zones. These cable assemblies are typically connectorized using 12-fiber micro-distribution cables (OM3 or OM4) and 12-fiber MPO connectors. MPO connectors can be offered with alignment pins (MALE) or no pins (FEMALE). In order to mate two MPO/MTP connectors together through an adapter, one connector must have male pins and the other must be without pins. Cables can be made as MPO-MPO patchcords or as MPO fanouts where one side of the cable assembly is terminated with an MPO connector while the other side has 12 individual single fiber connectors (LC, SC, FC, ST). The most common wiring scheme for a MPO-MPO patchcord is a straight through arrangements, where fiber #1 from one connector is connected to fiber #1 on the other connector, fiber #2 to fiber #2, and so on. This wiring arrangement will produce a patchcord where one connector has its mating key UP and the opposite connector will have its mating key DOWN. This common arrangement is referred to as a straight key up, key down MPO/MTP patchcord. Other wiring arrangements can be offered like reversed, pairs flipped, or any other per the desires of the customer. Benefits & Keyed Characteristics: Use to distribute some or all of the fibers in a trunk cable to other areas; Have pins (Male type) on one end of the connector, and no pin (Female type) on the other end; Choices of MPO/MTP in 12 or 24-fiber connector interface; 100% tested; Fiber counts available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers; Round & mini-core cable structure to eliminate bend sensitivity; Available in single-mode (9/125m),multi-mode (50 or 62.5/125m)and 10Gig fiber; Optional pulling eye design to fit for different installation environment. Used & Application: The data centra application with high dense degree environment; The optical fiber to the building; The internal connector application in fiber equipment such as Splitter, 40G/100G SFP and SFP. General Connector Specification: Other connectors'Industrial Standard: SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973; LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973; FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973; ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc. - - - - Parameter | Single-mode | Multi-mode | Basic | Fiber connector | FC, SC, LC, ST, MU, MTRJ, MPO | Ferrule End-face | PC | UPC | APC | UPC | Insertion Loss | 0.2dB | 0.2dB | 0.3dB | 0.3bB | Return Loss | 50dB | 55dB | 60dB | 35dB | Ceramic Ferrule Specification | 125.5um concentricity deviations: <=1um | 127um concentricity deviations:<=3um | Suitable Fiber | 9/125um | 50/125um,62.5/125um | End-face Geometry | Radius of Curvature | 7~25mm | 5~12mm | N/A | Fiber Protrusion | 50nm | 100nm | N/A | Fiber Under Cut | 100nm | 100nm | N/A | Apex offset | 50um | Mechanical | Exchangeability | 0.2dB | Salt Spray | 0.1dB | Drop | 0.2dB(1.5M, 5 drops) | Vibration | IL 0.2dB(550Hz, 1.5mm) | Repeatability | 0.1dB(1000 times) | Durability | > 1000 times | Operating Temperature | -40 ~ +85 | - - - - - - - - Type and Color Code Connectors | Insertion Loss (IL) | Optical Return Loss (RL) | Operating Temperature | Single-mode MTP Elite Connector | 0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1 | > 60 dB (8Angle Polished)2 | -40 to 75 | Single-mode MTP Standard Connector | 0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1 | > 60 dB (8Angle Polished)2 | -40 to 75 | Multimode MTP Standard Connector | 0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3 | > 20 dB (0Flat Polished)2,3 | -40 to 75 | 1 IL test according to IEC 61300-3-4; 2 RL test according to IEC 61300-3-6; 3 Tested with proposed encircled flux launch condition on 50m fiber & 850nm per IEC 61280-4-1. | - - - - - - - - Cable Type | Single-mode MTP Elite Connector | Single-mode MTP Standard Connector | Multimode MTP Elite Connector | Multimode MTP Standard Connector | Bare Ribbon | Yellow | Yellow | Aqua | Beige | Flat ribbon Cordage | Cable 2.0mm | Cable 3.0mm | Cable 3.6mm | Cable 4.5mm | Cable 5.0mm | Cable 5.5mm | - - - - Ordering Information: 1 ea for individual static-free bag with test report; Connector Customized Inquired; Cable Customized Length; - - - - Product Description | Lengths | Wire map | 24 Fiber MPO/MTP female female, OS2 | 0-80 Meter | Straight A Wire | 24 Fiber MPO/MTP male-female, OS2 | 0-80 Meter | Straight A Wire | 24 Fiber MPO/MTP male-male, OS2 | 0-80 Meter | Straight A Wire | 24 Fiber MPO/MTP female female, OS2 | 0-80 Meter | Straight B Wire | 24 Fiber MPO/MTP male-female, OS2 | 0-80 Meter | Straight B Wire | 24 Fiber MPO/MTP female female, OS2 | 0-80 Meter | Pair flipped C Wire | 24 Fiber MPO/MTP male-male, OS2 | 0-80 Meter | Pair flipped C Wire | - - - -

Basic Company Information

Sino Fibre Optic Company

Company Advantage

Detail Company Introduction