Industrial Wastewater Treatment Submersible Aerators 30m3/h Air volume 50Hz / 60Hz

Quick Detail

Package & Delivery Lead Time

Detailed Description

Industrial Wastewater Treatment Submersible Aerators 30m3/h Air volume 50Hz / 60Hz Application: - - - - 1 | With fast industrial developments, human life became more materially civilized. | 2 | On the contrary, gigantic quantities of waste water were brought by the industrial manufacturing | 3 | All these have affected the living quality and damaged the environmental ecology. | - - - - Features: 1. Submersible motor directly drive. 2. Low noise 3. High efficiency. 4. Dual protection, using a high filtration rate of the filter mesh to prevent particles from entering aerator body while maintaining the air input capacity. 5. Enlarge the space between the impeller and the mixing chamber to avoid the impeller being Performance parameters: - - - - Type | Power | Operation range (m) | Min-max water depth (m) | Air inlet pipe diameter (mm) | The maxium intake of air (m/h) 50HZ/60HZ | NO.of outlets 50HZ/60HZ | Weight (kg) | Cabtyre Cable | hp | kW | Power cable | Control cable | Length m | Material | NO | Coresxmm2 | NO | Coresxmm2 | AR5(6)1.5-40 | 2 | 1.5 | 1.0-2.0 | 1.0-3.0 | 40 | 40/40 | 8 | 135 | 1 | 3*1.5+1*1 | | 6 | Chloroprene Rubber or PVS | AR5(6)2.2-50 | 3 | 2.2 | 2.5-5.0 | 1.0-4.0 | 50 | 60/60 | 8 | 147 | 1 | 3*1.5+1*1 | | 6 | AR5(6)3.7-65 | 5 | 4 | 3.0-6.0 | 1.0-4.0 | 65 | 90/80 | 8 | 160 | 1 | 3*1.5+1*1 | 1 | 4*1 | 6 | AR5(6)5.5-65 | 7.5 | 5.5 | 3.5-7.0 | 1.0-4.0 | 65 | 150/120 | 10/8 | 315 | 1 | 3*2.5+1*1 | 1 | 4*1 | 10 | AR5(6)7.5-80 | 10 | 7.5 | 4.5-9.0 | 1.5-4.5 | 80 | 170/160 | 10 | 320 | 2 | 3*2.5+1*1 | 1 | 4*1 | 10 | AR5(6)11-80 | 15 | 11 | 5.0-10.0 | 1.5-4.5 | 80 | 260/260 | 10 | 368 | 2 | 3*4+1*2.5 | 1 | 4*1 | 10 | AR5(6)15-100 | 20 | 15 | 5.8-11.5 | 1.5-4.5 | 100 | 340/320 | 10 | 385 | 2 | 3*4+1*2.5 | 1 | 4*1 | 10 | AR5(6)19-100 | 25 | 18.5 | 5.9-11.8 | 2.0-5.0 | 100 | 360/360 | 10 | 432 | 2 | 3*10+1*6 | 1 | 4*1 | 10 | AR5(6)22-100 | 30 | 22 | 6.0-12.0 | 2.0-5.5 | 100 | 440/460 | 10 | 456 | 2 | 3*10+1*6 | 1 | 4*1 | 10 | AR5(6)30-150 | 40 | 30 | 7.3-14.5 | 2.0-6.0 | 150 | 510/500 | 10 | 998 | 2 | 3*16+1*6 | 1 | 4*1 | 10 | AR5(6)37-150 | 50 | 37 | 7.5-15.0 | 2.0-6.0 | 150 | 600/600 | 12/10 | 1080 | 2 | 3*16+1*6 | 1 | 4*1 | 10 | AR5(6)45-150 | 60 | 45 | 7.8-15.5 | 2.0-6.0 | 150 | 700/700 | 12/10 | 1155 | 2 | 3*16+1*6 | 1 | 4*1 | 10 | AR5(6)55-150 | 75 | 55 | 8.0-16.0 | 2.0-6.0 | 150 | 780/800 | 12 | 1200 | 2 | 3*25+1*10 | 1 | 4*1 | 10 | - - - - Assembly and disassembly: 1. First check whether the air tight test of the components has been conducted with the components, whether there are defects affecting assembly before the assembly, and clear burrs and clean the components, and then assemble them. 2.Press the motor stator into the main body of the motor on the pressing machine with the exclusive tooling. Attention: press it in position without damaging the enamelled wire. 3. Install the mechanical seal static ring on the middle bearing support, while install the mechanical seal dynamic ring on the shaft, and then install spring check ring on the shaft. 4. Case the O-shape ring on the fuel tank cap and install the fuel tank cap on the middle bearing support, and then lock the bolt firmly. 5. Install the mechanical seal static ring in the fuel tank cap and install the mechanical seal dynamic ring into the main shaft. Heat the bearing to 90 with oil and install it into the main shaft. Factory: Structure: - - - - No. | Name | Material | GB | JIS | 1 | Cable | 2RNCT | 2RNCT | 2 | The motor cover | HT200 | FC200 | 3 | Ball bearing | - | - | 4 | O-ring | NBR | NBR | 5 | Motor casing | HT200 | FC200 | 6 | Main shaft | 2Cr13 | SUS420J1 | 7 | Bracket | HT200 | FC200 | 8 | Mechanical seal | C-Al2O3 | C-Al2O3 | 9 | Lubricant | ISO VG32 | ISO VG32 | 10 | Mechanical seal | SiC-SiC | SiC-SiC | 11 | Oil cover | HT200 | FC200 | 12 | Aeration housing | HT200 | FC200 | 13 | Bottom cover of aeration housing | HT200 | FC200 | 14 | Entrance panel board | NBR | NBR | 15 | Screw | A2-70 | A2-70 | 16 | Gasket | 3Cr13 | SUS420J2 | 17 | Impeller | ZG0Cr18Ni9 | SUS304 | 18 | Ball bearing | - | - | 19 | Stator | - | - | 20 | Rotor | - | - | 21 | Terminal box | HT200 | FC200 | | Lifting rings | 0Cr18Ni9 | SUS304 | - - - -

Basic Company Information

GSD Industrial Co., Ltd.

Company Advantage

Detail Company Introduction