Industrial Vertical Submersible Sewage Pump , Electrical Wastewater Submersible Pump For Septic Tank

Quick Detail

Package & Delivery Lead Time

Detailed Description

Industrial Vertical Submersible Sewage Pump , Electrical Wastewater Submersible Pump For Septic Tank Application: Wastewater lift station; Municipal wastewater treatment plant; Building wastewater treatment system; Animal & poultry farm wastewater treatment system; Hospital, school, community etc. Wastewater treatment system; Food, paper, mining, textile, leather, chemical industry etc. wastewater treatment system. Water purification system. Features: NON-CLOG IMPELLER Well statically & dynamically balanced Non-Clog impeller is designed to allow sizable spherical solids to pass the plow passage easily without clogging.It adopts rigorous technics so that vibration and noise can be farthest reduced. LEAKAGE DETECTOR Built-in leakage detector in the oil chamber can dectet leakage from the damage of the mechanical seal. (The power lower than 15KW is optional,not lower than 15KW is standard accessories.)Built-in leakage detector in the wiring box can check if a leak in it,The leakage detector offers pump an automatic protection. (Not stamdard accessories, the power not lower than 18.5KW is optional) HEAT-DETECTOR Built-in heat protector in motor, it secures the protection of motor against burning out. (The power lower than 15KW is optional,not lower than 15KW is standard accessories.) overload & overheating to Built-in heat protector in bearing, when the bearing is abnormal and the temp- erature rises to disconneting temperature, the protector automatically cat off power supply to protect the bearing.(options) COOLING JACKET (OPTIONAL) Pumps make use of inner pressure of pump cauvty to make liquid contiwue entering to space between cooling house and motor outer, to take away the heat the motor produces. ( The power not lower than 18.5KW is optional) Points for attention before starting equipment: # # Check the insulation condition of the stator winding with a 0-500V meter before starting the water pumps. # Check whether the power and the voltage frequency used are in line with those listed on the label. # Don't connect the electric wire of the water pump with the power source without any protective device (which may lead to the burning of the motor due to open-phase and overload). Refer to the connection method of the submersible pump. (refer to Page 9 for details). # Before installation, check the rotation direction of the motor, the correction rotation direction is that the motor rotates counter-close seen from the suction direction of the impeller. If the rotation direction is not right, the connection positions of any two phases in three phases shall be shifted to get it rotate in a correct direction. # Check whether the grounding wire is earthed properly. # Check whether the operation of the level controller is in normal so as not to affect the service life of the submersible motor. # Close the gate valve of the outlet pipeline and start the motor. Under the circumstance that the gate valve of the outlet pipeline is shut, the pump cannot rotate over 3 minutes continuously. Monitor the motor current by switching on the gate valve and control the current within the rated range, and check whether the pressure of the pressure gauge and the operation of the pump are in normality, and refer to the trouble shooting sheet to remove in case of abnormality. # Operation without water is prohibited. # Submerging cable sockets of the motor into water is prohibited. # Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes. Construction: - - - - No. | Name | Material | GB | JIS | 1 | Neck bolt | 2Cr13 | SUS420 | 2 | Heat-Protector | - | - | 3 | Motor cover | HT200 | FC200 | 4-1 | Bearing | - | - | 4-2 | Bearing | - | - | 5 | Cooling house flange | Q215A | LSS330 | 6 | Shaft | 2Cr13 | SUS420 | 7 | Rotor | - | - | 8 | Stator | - | - | 9 | Cooling house | 0Cr18Ni9 | SUS304 | 10 | Bearing cover | HT200 | FC200 | 11 | Motor casing | HT200 | FC200 | 12 | Bracket | HT200 | FC200 | 13 | Leakage detector | - | - | 14-1 | Mechanical seal | C-Al2O3 | C-Al2O3 | 14-2 | Mechanical seal | SiC-SiC | SiC-SiC | 15 | Oil box | HT200 | FC200 | 16 | Oil cover | HT200 | FC200 | 17 | Washer | 0Cr18Ni9 | SUS304 | 18 | Impeller nut | HT200 | FC200 | 19 | Seal-ring | LBC2 | LBC2 | 20 | Strainer | HT200 | FC200 | 21 | Impeller | HT200 | FC200 | 22 | Pump casing | HT200 | FC200 | 23 | Bottom cover | HT200 | FC200 | 24 | Pall piping | Q215A | SS330/SS34 | 25 | Flange setter | HT200 | FC200 | 26 | Slide | HT200 | FC200 | 27 | Duckfoot | HT200 | FC200 | 28 | Discharge | Q215A | SS330/SS34 | - - - - Work shop:

Basic Company Information

GSD Industrial Co., Ltd.

Company Advantage

Detail Company Introduction