Non Sparking German Sledge Hammer, Brass Sledge Hammer, Hammer, Double Face Engineer's Hammer
0 likes
China [CN] The Non Sparking Tools Are Made Of Aluminum Bronze, Beryllium Bronze And Copper Alloy.Beryllium Bronze: Al: 0.15%, Fe: 0.15%, Si: 0.15%, Ni: 0.2-0.4%, Ti: 0.1-0.25%, Be: 1.8-2.0%, Cu Other: 0.6% Aluminum Bronze: Al: 9-10% Mn:3-5%, Fe: 3-4%, Ni:5% CuCopper Alloy: Al:9%, Co: 8%, Ni: 2-3% Cu
Non Sparking German Sledge Hammer, Brass Sledge Hammer, Hammer, Double Face Engineer's Hammer
Material: Brass, Aluminum Bronze And Beryllium BronzeHandle: Fiberglass Handle, Wooden Handle And Plastic Handle
Technical Data Of Sledge Hammer| Size(Mm) | L(Mm) | Al-Cu(G) | Be-Cu(G) |
| 1.35(3P) | 350 | 1350 | 1660 |
| 1.80(4P) | 355 | 1800 | 2060 |
| 2.30(5P) | 400 | 2300 | 2600 |
| 2.70(6P) | 400 | 2700 | 3000 |
| 3.60(8P) | 900 | 3600 | 4920 |
| 4.50(10P) | 900 | 4500 | 5820 |
| 5.40(12P) | 1000 | 5400 | 6720 |
| 6.30(14P) | 1000 | 6300 | 7720 |
| 7.20(16P) | 1200 | 7200 | 8300 |
| 8.10(18P) | 1200 | 8100 | 9200 |
| 9.00(20P) | 1200 | 9000 | 10000 |
| 9.90(22P) | 1200 | 9900 | 11200 |
| 10.80(24P) | 1200 | 10800 | 11900 |
AttentionsWhen Using A Sledge Hammer, The Connection Between A Hammer Head And A Hammer Handle Must Be Reliable; If Slightly Loose, Should Immediately Add The Wedge Fastening Or Replace The Hammer Handle; The Length Of The Handle Of The Hammer Must Be Moderate. Should Pay Attention To The Following Points: Hammer Features No Quenching, No Cracks And Burrs; Once Found, The Flash Volume Should Be Repaired Promptly. The Hammer Head And The Handle Must Be Firmly Connected, Usually A Hammer Head And A Hammerhandle Is Absolutely Not Loose, Splitting And Crack Use.
Click enlarge Image