Anti Slide Stainless Steel Chequer Plate, Decoration Chequer Plate Sheet

Quick Detail

Package & Delivery Lead Time

Detailed Description

Anti Slide Plate Thread Plate Stainless Steel Checkered Decoration Plate Production description The checkered plate is cut into sheets from the rolled coil will. Due to the careful inspection and removal of the defect, the dinal product will have a good shape anf surface quality. The edge condition of the sheets could be mill edge or cut edge. There are 2 package ways for the sheets.One is normal package, the sheets will be fastened by steel tapes without arapping. The other is PVC package.The sheets will be wrapped and protected by PVC from the sides and top and bottom directions. At present on market commonly used thickness from 1.2 to 10 mm inequality, the width of the common 1000mm and 1500 mm.According to checkered steel plate checkered steel plate the pattern plate national standard GB/T 3277 regulations, decorative pattern height should be greater than or equal to 20% of the thickness of the base plate. Details - - - - Product Name | Steel Pattern Diamond Surface Checkered Plate Galvanized Building Material | Size | Width | 1000-1500mm | Thickness | 1.2-10mm | Length | As required | Technique | Hot Rolled | Material | SS400 Q235 | Surface | Chequered | Standard | JIS G 3141 | Package | we can make the proper package according to the market of your country,and we can also design qualified package according to your taste or need. | Payment term | T/T,L/C,D/P,etc. | Price term | FOB,CIF,CFR,etc. | Port of Shipment | China Port | Delivery time | 3-8 days after receipt of the deposit | MOQ | 1mt | Supply Ability | 1000MTs/Per Month | Export to | Europe,South America, Africa, Mid East,Southeast Asia, Eastern Asia etc. | Application | anti-skid and decoration | - - - - Our services : Standard steel checkered plate sizes high quality steel plate low mild steel plate price Cut large coils into small coils. For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils. Open flat coils into steel checkered plate. For final application, need open flat the coils and cut the coils into steel checkered plate, so we open flat the coils and cut the coils to steel checkered plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1000mm and 1500mm. after cutting the steel checkered coils into checkered plate, we can do black paints on the surface of the plate to make the checkered plate to be anti-rust.

Basic Company Information

ANPING BAOSHENG WIRE MESH PRODUCTS CO.,LTD

Company Advantage

Detail Company Introduction

Trade Information