Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
Specification:
Model number: INTL-XZC1177
Car name: Hyundai Sonata Santa Fe Kia Optima Magentis
Type: HS17
Grooves: 5PK
clutch DIA: 124mm
Voltage: 12V
Special Notes:
Can be used for:
1999-2005 Hyundai Sonata L4 2.4L
2005-2006 Hyundai Santa Fe L4 2.4L
2001-2010 Kia Optima L4 2.4L
2001-2010 Kia Magentis L4 2.4L
YEAR | MAKE | MODEL | ENGINE |
---|---|---|---|
2002 | Hyundai | Sonata | L4 2.4L 2351cc |
2003 | Hyundai | Sonata | L4 2.4L 2351cc |
2004 | Hyundai | Sonata | L4 2.4L 2351cc |
2005 | Hyundai | Sonata | L4 2.4L 2351cc |
1999 | Hyundai | Sonata | L4 2.4L 2351cc |
2000 | Hyundai | Sonata | L4 2.4L 2351cc |
2001 | Hyundai | Sonata | L4 2.4L 2351cc |
2005 | Hyundai | Santa Fe | L4 2.4L 2351cc |
2006 | Hyundai | Santa Fe | L4 2.4L 2351cc |
2001 | Kia | Optima | L4 2.4L 2351cc |
2002 | Kia | Optima | L4 2.4L 2351cc |
2003 | Kia | Optima | L4 2.4L 2351cc |
2004 | Kia | Optima | L4 2.4L 2351cc |
2005 | Kia | Optima | L4 2.4L 2351cc |
2006 | Kia | Optima | L4 2.4L 2359cc |
2006 | Kia | Optima | L4 2.4L 2351cc |
2007 | Kia | Optima | L4 2.4L 2359cc |
2008 | Kia | Optima | L4 2.4L 2359cc |
2009 | Kia | Optima | L4 2.4L 2359cc |
2010 | Kia | Optima | L4 2.4L 2359cc |
2008 | Kia | Magentis | L4 2.4L 2359cc |
2009 | Kia | Magentis | L4 2.4L 2359cc |
2010 | Kia | Magentis | L4 2.4L 2359cc |
2001 | Kia | Magentis | L4 2.4L 2351cc |
2002 | Kia | Magentis | L4 2.4L 2351cc |
2003 | Kia | Magentis | L4 2.4L 2351cc |
2004 | Kia | Magentis | L4 2.4L 2351cc |
2005 | Kia | Magentis | L4 2.4L 2351cc |
2006 | Kia | Magentis | L4 2.4L 2351cc |
2007 | Kia | Magentis | L4 2.4L 2359cc |
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced