Welded razor wire fence

Welded razor wire fence is a type of high security wire mesh fence panel to be used in prison, military sites, airport and other places, which needs to prevent intruders in. It is combined with welded wire mesh fence panels and razor wires.

Welded wire mesh fence

Welded wire mesh fence is one of the most widely used type among all the security fences. It has curvy types, anti-climbing types, BRC types and others. Manufactured from low carbon steels and then welded and surface treated with galvanized or PVC coated to improve the corrosion and rust resistance performance. Welded wire mesh is widely used combined with razor wire to improve the security factor.

Curvy welded wire mesh fence

Curvy welded wire mesh fence, also called 3D security fence, curved welded wire mesh fence. It has two to four curves on the body of the wire mesh fence panel according to different fence height.

Specifications of curvy welded wire mesh fence

• Material: low carbon steel wire or galvanized wire.
• Wire diameter: 3 mm to 8 mm.
• Mesh size: 50 mm × 100 mm, 50 mm× 150 mm, 50 mm ×200 mm, 75 mm × 150 mm, 75 mm × 200 mm.
• Panel height: 0.63 m to 2.43 m. Specially is 3.5 m to 4 m.
• Panel length: 2 m to 3 m.
• Curve quantity: 2, 3 or 4.
• Post type: peach post, square post, rectangular post and round post.
• Surface treatment: hot dipped galvanized, PVC coated, powder coating.
• Razor wire type: flat warp razor wire or concertina cross razor wire.

WRWF-02: Galvanized curvy welded wire mesh fence.

WRWF-03: PVC coated curvy welded wire mesh fence.

WRWF-04: Galvanized curvy welded wire mesh fence with razor wire.

WRWF-05: PVC coated curvy welded wire mesh fence with razor wire.

Anti-climb fence

Anti-climb fence, also known as 358 mesh fence, it is an efficient security barrier fence to be used in high security requirements places. Compared with traditional welded wire mesh fence, the anti-climbing fence has smaller mesh sizes, which can prevent intruders from climbing up with fingers and toes. Additional, the thicker wires and conventional bots can prevent any tools from breaking the fence.

Specifications of anti-climb fence

• Material: low carbon steel.
• Surface treatment: hot dipped galvanized after welding and PVC coated after welding.
• Wire diameter: 4 mm.
• Mesh size:
  • 358 mesh fence: 76.2 mm × 12.7 mm.
  • Anti-climb fence: 70 mm × 8 mm.
• Fence width: 2515 mm.
• Fence height: 2.0 m to 5.2 m.
• Post section: 60 mm × 60 mm, 80 mm × 80 mm, 100 mm × 100 mm, 120 mm × 120 mm.
• Post plate thickness: 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm.
• Colors: green or black. Special colors can be customized.

WRWF-06: PVC coated anti-climb fence.

WRWF-07: Galvanized anti-climb fence.

WRWF-08: Anti-climb fence can be curved for high security.

WRWF-09: Razor wire on the anti-climb fence can increase the safety factor.

Razor wire

Razor wire, also called concertina razor wire. It is an effective and economical security barrier. It is made of galvanized steel blade to wrap around a galvanized core wire. The concertina razor wire can be made into different blade types to supply high security. The razor wire can prevent most of the intruders for it is hard and dangerous to break. Razor barbed wire can not only be used individually, it is widely used combined with other types of wire mesh fences, such as chain link fence, welded wire mesh fence to improve the safety factor. Additional, the razor wire is low cost, so it is an ideal choice with low cost and high security factor fence for site security.

Types of razor wire

WRWF-10: Galvanized razor wire.

WRWF-11: PVC coated razor wire.

WRWF-12: Flat warp type razor wire.

WRWF-13: Straight type razor wire.

WRWF-14: Spiral type razor wire.

WRWF-15: Concertina type razor wire.

• According to material.
  • Electric galvanized razor wire.
  • Hot dipped galvanized razor wire.
  • Stainless steel razor wire.
• According to structure.
  • Spiral razor wire. The spiral coils are interconnected at several points in a certain pattern. It is much more efficient than single reinforced barbed tape and conventional barbed wire.
  • Straight razor wire. The straight type razor wire is combined with several straight barbed tapes, which can be installed quickly. It can not only save expenditure but also reach the result of frightening and stopping.
  • Concertina cross razor wire. It has continuous spiral which are fastened two razor wire loops together at various intervals with clips. Concertina cross razor wire has good appearance, high security and durable life. It is the most widely used type.
  • Flat warp razor wire. The coils are located in a flat surface and its coils are fastened together by the galvanized staples. It is more compact to use and less aggressive.

Common types of razor wire

Reference number	Blade style	Thickness(mm)	Wire diameter(mm)	Blade length(mm)	Blade width(mm)	Blade spacing(mm)
BTO-12		0.5 ± 0.05	2.5 ± 0.1	12 ± 1	15 ± 1	26 ± 1
BTO-15		0.5 ± 0.05	2.5 ± 0.1	15 ± 1	15 ± 1	33 ± 1
BTO-22		0.5 ± 0.05	2.5 ± 0.1	22 ± 1	15 ± 1	34 ± 1
BTO-30		0.5 ± 0.05	2.5 ± 0.1	30 ± 1	18 ± 1	45 ± 1
CBT-25		0.5 ± 0.05	2.5 ± 0.1	25 ± 1	16 ± 1	40 ± 1
CBT-60		0.6 ± 0.05	2.5 ± 0.1	60 ± 2	32 ± 1	100 ± 2
CBT-65		0.6 ± 0.05	2.5 ± 0.1	65 ± 2	21 ± 1	100 ± 2
CBT refers to Concertina Barbed Tape. BTO refers to Barbed Tape Obstacle.

Applications of welded razor wire fence

Welded razor wire fence is widely used in the places, where need high security requirements, such as:

• Airport.
• Military site.
• Prison.
• Factory.
• High class residences.
• Secure hospitals.
• Schools.
• Parks.

WRWF-16: Welded razor wire for prison protection.

WRWF-17: Welded razor wire for airport protection.

WRWF-18: Welded razor wire for factory protection.

WRWF-19: Welded razor wire for farmland protection.