Anti-intruder Fence

Chain Link and Welded Wire Anti-intruder FencesAnti-intruder fence is designed for situations that requires a higher level of protection like factory, airport. We supply two types of anti-intruder fences: chain link fence and welded wire mesh fence. Despite of different workmanship, these two fence panels are both produced at least 2.4 m in height and compatible with barbed wire, razor barbed wire to prevent intruders from entering.Chain Link FenceOur anti-intruder chain link fence panel is made of mild steel wire with 40 mm or 50 mm mesh openings. The width of the mesh shall be 2.4 m, if it is not to be buried, or 2.7 m if it is to be buried. To make an anti-intruder fence, chain link mesh panels are joined by interweaving a spiral and restoring the knuckle or barb.On account of chain link panels' specific workmanship, several types of wires is needed: line wire, stirrup wire and tying wire. Line wire is used to across the entire panel horizontally and linked together with posts at the ends. For 2.4 m height fence, 5 rows of line wires are necessary, the top row of wires shall be double and secured not more than 50 mm below the top of the chain link mesh. Stirrup wire is used for securing line wires to intermediate posts. Tying wire is used for securing mesh to line wires.To fix our chain link fence panel, concrete, steel and wooden posts could all be used. We can only offer steel posts with well-suited holes but not wooden or concrete posts in consideration of transportation and costing. Posts to match 2.4 m height fence should be not less than 3.2 m. We can provide two types of posts: normal mesh fixed posts and heavy duty mesh fixed posts. Intermediate posts, straining posts and struts are supplied separately in our company.Galvanized anti-intruder chain link fence with posts to fix in a tree farm.AIF-01: Galvanized anti-intruder chain link panels with posts, rails and barb shape on top.Three ways to deal with the top of chain link fence, barb, flat, knuckle.AIF-02: Top forms: barb, flat, knuckle.SpecificationMaterial: mild steel wire.Wire coating (conforming to BS EN 10223-6): zinc coated wire, zinc alloy coated wire, plastic coated wire.Shape of top: barb, flat and knuckle.Panel height (m): 2.4; 2.7 (0.3 m buried).Colors: green, black, blue, white. All RAL color is available.Accessories: steel posts, struts, tie wire, gate, extension arms, barbed wire, base plates, eye bolt strainers and cleats, winding brackets, stretcher bars, bolts, nuts and washers.Table 1: Specification of wires in chain link (dimensions in millimeters)Type of mesh protection    Mesh wire    Line wire diameter    Stirrup wire diameter    Tying wire diameterMesh size    Zinc coated wire diameter    Plastic coated wire diameter grade A    Zinc coated wire    Plastic coated wire grade A    Zinc coated wire    Plastic coated wire grade A    Zinc coated wire    Plastic coated wire grade ACore wire    External wire    Core wire    External wire    Core wire    External wire    Core wire    External wireZinc coated chain link    40    3.55              4.00              2.5              1.60          Zinc coated chain link    50    3.55              4.00              2.5              1.60          Zinc coated chain link    50    5.00              5.00              2.5              1.60          Plastic coated chain link    50         3.55    4.75         3.55    4.75         2.5    3.55         1.40    2.00Plastic coated chain link    50         4.75    6.40         4.75    6.40         2.5    3.55         1.40    2.00Table 2: Specification of postType of post    Post height (m)    Intermediate posts section    Straining posts Section    Struts section A)Normal mesh C)mm    Heavy duty mesh D) mm    Normal mesh C)mm    Heavy duty mesh D) mm    Normal mesh C)mm    Heavy duty mesh D) mmRolled steel angle    3.2    50 × 50 × 6    60 × 60 × 6    60 × 60 × 8    75 × 75 × 8    45 × 45 × 5    50 × 5 × 6Rectangular hollow section E)    3.2    50 × 50 × 3    50 × 50 × 4    60 × 60 × 3    60 × 60 × 4    50 × 5 × 3    50 × 5 × 4Circular B) hollow section E)    3.2    48.3 × 3.2    60.3 × 4    60.3 × 4    76.1 × 4    48.3 × 3.2    48.3 × 3.2A) All struts shall have a horizontal tie bar not less than 600 mm long, securely fixed to strut and straining post with bolts not less than 8 mm nominal diameter.The ends of hollow sections are to be capped or sealed.B) Excluding extension arm.C)Normal mesh for wire diameters of 3.55 mm zinc coated and 3.55 mm/4.75 mm plastic coated.D) Heavy duty mesh for wire diameters of 5.0 mm zinc coated and 4.70 mm/6.4 mm plastic coated.E) The ends of tubes and hollow sections are to be capped or sealed.Welded Wire Mesh FenceGreen PVC coated welded wire mesh panels are overlapped on the earth waiting for installation.AIF-03: Anti-intruder fence made by welded wire mesh panels extended a small part on the top.Anti-intruder welded wire mesh fence is made from zinc coated wire. The height of the welded mesh fence is 2.4 m, if it is not buried, or 2.7 m if it is buried.If plastic coated mesh panel is used by combing two panels to reach a 2.4 m height, the panels could be 1500 mm and 1050 mm for 75 mm × 25 mm mesh or 1500 mm and 1000 mm for 50 mm × 50 mm mesh.If plastic coated mesh panel is used by combing two panels to reach a 2.7 m height, the panels could be 1800 mm and 1050 mm for 75 mm × 25 mm mesh or 1800 mm and 1000 mm for 50 mm × 50 mm mesh. Because the panels shall be overlapped horizontally by a minimum of two complete meshes in consideration of a solid structure.Barbed wire and razor barbed wire fixed to the top edge could be provided on request. Welded mesh fences have four line wires evenly spaced on the panel.SpecificationMaterial: mild steel wire.Wire coating (conforming to BS EN 10223-6): zinc coated wire, zinc alloy coated wire, plastic coated wire.Wire diameter (mm): 3.00.Mesh size (mm): 50 mm × 50 mm or 75 mm vertical × 25 mm.Fence panel height (m): 2.4, 2.7 (0.3 m buried).Panel width: 2000 mm, 2500 mm.Colors: green, black, blue, white. All RAL color is available.Accessories: steel posts, struts, tie wire, gate, extension arms, barbed wire, base plates, stretcher bars (clamping bars), stainless steel clips, bolts, nuts and washers.Specification of accessories:Line wire diameter (mm): 3.0.Stirrup wire diameter (mm): 2.50.Tying wire diameter (mm): 1.6.Post type and specification: same as specified in anti-intruder chain link fence (See table 2).FeaturesHigh-security protective level: This anti-intruder fence is manufacture for 2.4 m in height and could be equipped with barbed wires.Durability: The fence is PVC coated, therefor it could be corrosion resistant when exposed outside.Inexpensive: The wire used for making fence is purchased from experienced suppliers, and our manufacture equipment is in a level of state-of-the-art.Application: This anti-intruder fence is a high-safety level fence, therefor it suits for higher security needed sites, such as: factory, airport, commercial sites, playground, freeway and farm.Anti-intruder fence be used to encircle into several cages in front of a building.AIF-04: Black coated chain link panels could be manufactured into cages to create a space or protect the valuables.Galvanized welded wire mesh fence around the airport with razor barbed wire on the top.AIF-05: Anti-intruder welded mesh fence is used in airport with razor barbed wire to ensure a high security level protection.

TEL : 86-318-76632111 / FAX : 86-318-76632111
East industrial Zone, Anping, Hebei, China. hebei hengshui China [CN]
Homepage : http://www.358meshfence.com/index.html

Main Products