mineral fiber ceiling insulation wool

Three methods of installation of mineral wool board suspended ceiling????First, the mineral wool plate screw methodThis method is the first mineral wool board installation used in a relatively clumsy Kuangmian board installation method, the first layout in the room layout of the main keel, and then install the mineral wool board, the use of screw-fixed way. First place in the center of the mineral wool board plastic receptacle, with screws fixed to the keel, and then docking mineral wool board, the four fast mineral wool board diagonal point, the same use of plastic receptacle and screw fixed to the keel. This fixed way is too much trouble, and the overall mineral wool board installed, it is not very beautiful, and now has basically been eliminated.Second, the paint keel lifting methodWe often use the paint keel lifting method, generally the first in accordance with the overall requirements of the room and the use of mineral wool board layout design good keel position. First install the light steel keel, and then followed by lifting a good T-shaped paint keel in the ceiling to form a fast grid, and finally the entire piece of mineral wool plate in accordance with the different open frame open frame installed in the paint keel. In the corner of the room position, may be due to the use of different mineral wool board, cut into the size of the design to install fixed.

Third, the surface paste methodIn some home improvement or ceiling shape needs, we often use this way, the use of special mineral wool paste board, you can do some staggered modeling, so that the overall ceiling is more three-dimensional and beautiful. General installation, will first install a layer of gypsum board in the ceiling, and then coated with glue in the mineral wool board back and four corners, directly to the mineral wool board paste in the gypsum board, and will be marked with gun nails reinforcement. Note that the use of gun nails only