Mould Liquid Silicone Rubber for sculptures
0 likes
China [CN] Introduction of Mould Liquid Silicone Rubber for sculptures
RTV Silicone rubber for Concrete Mold Making is a kind of two-component material, that is the mold making silicone rubber is made up of Part A base silicone and Part B CA30 curing agent. The mixed Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction,and the become a silicone rubber mold that can be used for objects reproduction.These RTV-2 silicone rubber molds can be cast into different material for your target objects.The pouring material can be plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Characteristics of Mould Liquid Silicone Rubber for sculptures
1. Good flow ability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
Technical data-sheet of Mould Liquid Silicone Rubber for sculptures
Base and Curing Agent Mixture (100:3 by weight) in 25 °C (77F) testing
|
Item |
Mixing Ratio |
Color |
Hardness (shore A) |
Viscosity (cps) |
Operating time (25°C) |
Curing time (25°C) |
Tear- Strength |
Tensile- strength |
Elongation |
Shrinkage |
|
S815 |
100:3 |
White |
15±2 |
11000 ±3000 |
30-50mins |
3-4h |
22±3 |
≥3.3 |
≥500 |
≤0.2% |
|
S820 |
100:3 |
White |
20±2 |
14000 ±3000 |
30-50mins |
3-4h |
26±3 |
≥3.3 |
500 |
≤0.2% |
|
S825 |
100:3 |
White |
25±2 |
22000 ±3000 |
30-50mins |
3-4h |
26±3 |
≥3.4 |
400 |
≤0.2% |
|
S830 |
100:3 |
White |
30±2 |
24000 ±3000 |
30-50mins |
3-4h |
26±3 |
≥4.2 |
350 |
≤0.2% |
|
S835 |
100:3 |
White |
35±2 |
28000 ±3000 |
30-50mins |
3-4h |
25±3 |
≥4.5 |
350 |
≤0.2% |
|
S840 |
100:3 |
White |
40±2 |
15000 ±3000 |
30-50mins |
3-4h |
21±3 |
≥3.5 |
300 |
≤0.2% |
|
S845 |
100:3 |
White |
45±2 |
14000 ±3000 |
30-50mins |
3-4h |
20±3 |
≥3.3 |
250 |
≤0.2% |
Applications of Mould Liquid Silicone Rubber for sculptures
RTV Silicone rubber for Concrete Mold Making can be applied in the reproduction of cement molding, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.
Instructions of Mould Liquid Silicone Rubber for sculptures
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.
5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original
6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.
Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 min under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Products show of mold making silicone for sculptures:
Mould Liquid Silicone Rubber for Making Moldes to Make Sculptures Prices
If you have any other problems or need any assistance from our side, just contact us at anytime. OTT is here for you all the time.
If you need any help on silicone rubber, please feel free to contact:
Ms. Vicky
Email: gze(at)ottsilicone.net
Skype: live:vicky_ottsilicone
WhatsApp: +86-18318342964
Phone: +86-020-86819712
Fax: +86-020-86812232
Click enlarge Image