prices electronic liquid silicone rubber free silicone samples

Prices electronic liquid silicone rubber free silicone samples

Introduction of prices electronic liquid silicone rubber free silicone samples  

prices common electronic potting silicone rubber is a two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.Features of prices electronic liquid silicone rubber free silicone samples  

Easy mix with 1: 1 proportionLow viscosity, good flow abilityRoom temperature cure or heat up cureThermal conduction, flame resistanceWithout solvent

Using Instructions of prices electronic liquid silicone rubber free silicone samples  

1. Preparing: Clean up the coating surface, remove the rust, dust, oil dirt.2. Pouring: Weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.3. Curing: Room temperature cure or heat-up cure is both workable.4. It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contact with moisture in the air.

Packaging of prices electronic liquid silicone rubber free silicone samples:  

Packs are available in 20kg and 200kg per drum.

Storage & Transportation of electronic potting compound silicone rubber

1. Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months.2. It can be stroked and transported as non-dangerous goods.

 Technical guidelines of prices electronic liquid silicone rubber free silicone samples :

1. Pls put part A and part B in separate container and stir evenly before mixing the two part\ together.

2. Weight Ratio: part A: part B = 10:1

3. Deaeration the mixture under 0.08 MPa for 3 minutes.

4. The temperature influences the curing time of electronic potting silicone rubber.

5. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm tips for prices electronic liquid silicone rubber free silicone samples :

1. The electronic potting silicon rubber should be sealed storage.The mixture should be used up at

once, avoid causing waste.

2. The electronic potting silicone rubber belongs to non-dangerous goods, but keep away from

mouth and eyes.

3. When electronic potting silicone rubber gets stratified after a period of storage, Please mix the

electronic potting silicone rubber evenly before using, it does not affect the performance