Chain Link Fence Gate
0 likes
China [CN] 
Single swing chain link gate has one leaf and is usually for man going trough. It also can be made with a larger opening, just make sure enough space for gate openingDouble SwingChain Link Gate
Double Swing Gates have two leafs and a drop rod to hold them in place while the gate is shut.It is both for man and vehicle.Specification
| Height of gate panel (m) | 1.0m,1.2m,1.5m,1.8m,2.0m |
| Width of gate panel (m) | Single leaf:1m,1.2m,1.5mDouble leaf:2.0m,3.0m,4m,5m,6m,8m |
| Gate frame Surface | Square tubes:35x35mm,40x40mm,50x50mm,60x60mm |
| Surface Treatment | Galvanized or PVC coated |
| Colour | green, blue, yellow, white, red etc |
Step 1: Install the line post and terminal posts by using of tension bands, brace bands and bolts.Step 2: Attach line post caps. Join the top rail with swaged end. Plain end of the top rail fits into rail end fittings on the terminal post.Step 3: After assembling framework as above, unroll the chain link netting fabric on the ground along the fence line starting at terminal post.Step 4: Then slide the tension bar through the last link in the fence fabric and attach this combination to the terminal post using tension band and bolts.Step 5: Adjustment of mesh netting. If more or less netting fabric is required to span the opening, an additional amount can be connected or removed.Step 6: The chain link fence netting shall be on the outside face of all posts and loosely attached to the top rail by a tie wire.
Click enlarge Image