Wave Soldering (Short-lead Operation)
0 likes
China [CN] |
Technical Parameter of Wave Soldering (Short-lead Operation)
|
||||
|
Type
|
XH-LF330C
|
XH-LF360B & XH-LF360C
|
XH-LF450C & XH-LF450C/N
|
|
|
Control Method
|
Touch-screen Intelligent Control
|
Touch-screen Intelligent Control & Windows Xp Control System
|
Windows Xp Control System
|
|
|
PCB Size
|
Max.300mm(Non-standard Mode: Max.500mm)
|
|||
|
Amplitude Modulation Device
|
Two Groups of Precision Leading Screw Amplitude Modulation,Manual Control
|
Three Groups of Precision Leading Screw Amplitude Modulation,Manual Control
|
Three Groups of Precision Leading Screw Amplitude Modulation,Manual Control(or choose Automatical Control)
|
|
|
Transmission Speed
|
Max.3000mm/min
|
|||
|
Pre-heating Zone
|
Length:1200mm (600*2 independently control temperature),Temperature:Ambient 230℃
|
Length:1500mm (750*2 independently control temperature),Temperature:Ambient 230℃
|
Length:1800mm (600*3independently control temperature),Temperature:Ambient230℃
|
|
|
Pre-heating Method
|
Drawer,Infrared Pre-heating (without high-temperature glass)
|
Drawer,Infrared Pre-heating (with high-temperature glass)
|
Drawer,2 Infrared and 1 hot air;Infrared Pre-heating (with high-temperature glass)
|
|
|
Pre-heating Cover
|
Iron sheet structure,without visible window warm-keeping cover
|
Iron sheet structure,without visible window warm-keeping cover
|
Aluminium structure,with visible window warm-keeping cover
|
|
|
Tin Stove temperature
|
Ambient Temp.:350℃
|
|||
|
Tin Stove Nozzle
|
Nozzle Width: adjust from 150mm to 300mm (manual adjustment)
|
|||
|
Tin Stove Structure
|
All tin liquid cycle fully to keep the same temperature in tin bath,clean nozzle without slag and guide tin slag to operation party for convient maintenance.
|
|||
|
PCB Transmission Direction
|
From left to right & from right to left
|
|||
|
PCB Transmission Higth
|
750±20mm
|
|||
|
PCB Soldering Tin Angle
|
5~7°
|
|||
|
Rosin Spraying Pressure/Flow
|
5~6Kgf/c㎡ 10~100ml/min
|
|||
|
Soldering Capacity
|
Approx.20 Liters
|
|||
|
Nozzle Move Mode
|
Stepping motor,seal,straight-line sliding rail style
|
Stepping motor,seal,straight-line sliding rail style
|
Stepping motor,seal,straight-line sliding rail style,modularity structure,convenient maintenance.
|
|
|
Air Knife EquipmentFlux Flow Regulation
|
Without Air KnifePressure regulate flow
|
With Air KnifePressure regulate flow
|
With Air KnifeFlux flow regulate flow
|
|
|
Flux Level Control
|
No
|
Alarm on low level
|
Alarm on low level,Automatically add flux flow
|
|
|
Nitrogen Consumption
|
15-25 Square Meters/Hour & 350-900ppm (Only used for nitrogen wave soldering XH-LF450C/N)
|
|||
|
Tin Stove Capacity
|
Single Wave Soldering 240Kg,Double Wave Soldering 350Kg
|
|||
|
Stove Body Frame
|
Move up and down or into and out by simple manual screw rod
|
Move up and down or into and out by simple manual screw rod
|
Move up and down or into and out easily by maunal turbo
|
|
|
Cooling Mode
|
Cooling by natural air on axial fan board
|
Force nature air cooling by top and botttom board of centrifugal fan
|
Force nature air cooling by top and botttom board of centrifugal fan
|
|
|
Suitable Solder Type
|
Lead-free solder/ Normal solder
|
Lead-free solder/ Normal solder
|
Lead-free solder/ Normal solder
|
|
|
Normal/Starting Power
|
Approx.5KW/18W
|
Approx.6KW/19W
|
Approx.7KW/22KW
|
|
|
Power Supply
|
Three-phase Five-wire System 380V 50/60Hz
|
|||
|
Outline Dimension
|
L3300*W1200*H1480
|
L3600*W1200*H1480
|
L4500*W1200*H1530
|
|
|
Weight
|
1300Kg
|
1380Kg
|
1450Kg
|
|
Click enlarge Image