Polyurethane adhesive for making rebonded foam
0 likes
China [CN] The flow chart for use the glue:
The adhesive and broken sponge is measured according to the proportion of 6: 100,stirring both sides at a certain period of time,spraying the glue evenly,mixing them evenly ,then put it into the mold box,paving,leveling, forcing, Under the condition of steam heating, shaping 10-30 minutes ,then out of the box. Curing to mold 1 ~ 2 hours in summer at room temperature generally, 3-4hours in summer at room temperature generally.
| Code/Property | 128# | 218# |
| Appearance | Deep yellow viscous liquid | Deep yellow viscous liquid |
| Viscosity(mpa.s) | 100-1650 | 100-1500 |
| Comments | Good quality, even suitable for the low quality renewable sponge | Stable quality,applied in the normal renewable sponge |
| Cotent | GBLAdhesive | Triditional | |
| Echnomical | Cost Saving | 10%~15% | None |
| If exist the waste and scrap during the operation | No | Yes | |
| Enviromental Protection | If inflammable | Yes | No |
| Harmless for human | Yes | No | |
| Operation | If need temperature control | No | Yes |
| If need fore mixture before pouring | No |
Yes |
|
ABOUT OUR COMPANY |
Wuhan boli chemical co., LTD is the professor for manufacturing the glue for recycled foam and sponges,It is the polymeric from polyether polyol and isocyanate, It has a strong adhesive force with the broken pieces of the sponge, it is the professional adhesive for every high low density renewable sponges, With the characteristic of speed adjustable, easily to use, non toxic, and passed the certification by SGS.
Click enlarge Image