BRIEF INTRODUCTION OF THE MODEL MZ-4005 OIL SEAL CIRCUMGYRATING PERFORMANCE TESTER
FEATURES AND PURPOSE:
The MODEL MZ-4005 OIL SEAL CIRCUMGYRATING PERFORMANCE TESTER applies hermetic test performance and scientific research of all kinds of turning oil seal. The oil seal is installed on the tester and the primary axis with certain velocity turns round. After certain running time, you can observe whether oil seal seep or not. Every time two oil seals can be tested and testing shaft can be turned ahead and backwards. This machine construction is reasonable; design is novel; starting performance is good; starting force moment is large; modulating velocity range is wide and changing rate of revolving speed is small with low noise is low and convenient operation. It accords the requirement of GB/T14273 The Testing Method of Circumgyrating Axis-Lips Seal Circle.
Technical parameters:
1. Revolving speed of primary axis: maximal 6000r/min
(Also according to the requirement of users)
2. Flopping error of primary axis: < ±0.03mm
3. The regulated amount of deviation of the axis center:
0mm~5mm
4.The range of oil seal shaft-hole:Ф7mm~Ф200mm
5. The range of temperature control:
normal temperature~120℃
6.Control method: MZ-4005A cone with six shifts for changing velocity; MZ-4005B frequency modulating velocity, pneumatic pressure, automatic control of testing cycle; MZ-4005C frequency timing, pneumatic pressure, beeline track, PLC control,MZ-4005D with computer control.
7.The motor power: 2.2kW×2
8. Power: AC380V three-phase and four-wire system (must have zero wire)50 Hz
9. Dimensions:1300mm×1000mm×1500mm
10. Weight: 420kg
0 likes
China [CN] 
Click enlarge Image