Metallized Film for capacitor use

Capacitor film,metallized film,metallized polypropylene film,metallized polypropylene film for capacitor,capacitor grade metallized film,metallized film for capacitor use,MPP film,metallized polyester film,metallized capacitor film,metallised capacitor films.

Coating a thin Al/Zn layer on the surface of plastic film, will get high self-healing Al/Zn metallized film for capacitor use.

The prominent feature of metallized film is its self healing ability. That is, when somewhere is breakdown, short-circuit current can make the film around the breakdown area melting and evaporation to recover its insulation property. Thus significantly reduce the impact on the breakdown strength by conductive defects and weakness in paper or film, thereby improving the working field.

Generally the thickness of the metal layer is 5nm-50nm, but on the international it can be 1nm-100nm. In terms of heat resistance, 1nm-100um is preferred, while ideration of electric properties, 5nm-50nm is more preferred.

Under the same evaporation conditions, the larger the coating thicknessδ, the smaller square resistance (Ω/□) , the smaller the resistance R, the greater the load current, while the worse self healing properties.

Al/Zn metallized film use heavy edge evaporation method, greatly reduce the contact resistance between the spraying area and the cores of the film capacitors, which has improved the quality of the capacitors.

Features:

Al/Zn metallized film has a better pressure resistance.

Al/Zn metallized film has a worse moisture resistance, easily oxidized.