silicone sealant with ageing-resistant performance
0 likes
China [CN] Before the curing
| Appearance | White paste |
| Relative density | 1.60~1.70(g/cm3) |
| Surface drying time | ≤15(min) |
After the curing
| Tensile strength | ≥1.5(MPa) |
| Elongation At Break | ≥150(%) |
| Shear strength | ≥2.0(MPa) |
| Hardness | 35~45(Shore A) |
| Temperature Range | -60~200(℃) |
| Volume resistivity | 2.2×1015 (Ω·cm) |
| Dielectric strength | 20 (kV/mm) |
| Thermal conductivity | ≥0.8[W/(m·k)] |
| Dielectric constant | 3.12(1.2MHz) |
Packaging: 300mL / tube,25tubes / box.
APPLICATION RANGE
APPLICATION RANGE
 |
|
Widely used in various types of electronic
components, play the role of heat conduction, fire retardant, waterproof.
|
 |
 |
 |
||
| CPU Radiator | Chip And Radiator | Radiating |
 |
 |
|
| Radiating Bars | LED Lamp |
PRODUCTION CHARACTERISTICS
PRODUCTION CHARACTERISTICS
|
Can be used in harsh environments for a long time The silicone sealant has the performance of superior
high and low resistance, excellent insulation, high
stability with thermal oxidation and ozone. It can be
widely used in aerospace, automotive electronics,
office equipment, construction and so on.
|
 |
 |
Effectively prolong the service life of electronic components Silicone sealant has superior thermal conduction and
bonding property.it not only can fixed the
electronic components, make heat transferring to the
heat sink, to prevent overheating of electronic
components to avoid resulting in break down,
which can improve the service life.
|
WISE CHOOSE
OUR ADVANTAGE
Our company is committed to providing superior solution about
silicone rubber for customers,we have long-term cooperation with
many famous customers of industry and listed company.
 |
||
| 4 MAIN REASONS | ||
 |
||||||
|
||||||
|
NON-CORROSION
Protect the electrical equipment
|
||||||
 |
||||
|
GOOD THERMAL PROPERTY
Wide application
|
||||
 |
||||
|
GOOD ADHESION
Excellent dielectric properties
|
||||
 |
||||
|
HEAT RESISTANT
Apply for various metal
|
||||
METHOD OF OPERATION
INSTRUCTIONS
1,Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.
2,After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.
3,Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.
MATTERS NEEDING ATTENTION
NOTE
After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.
SPECIFICATION TRANSPORT
STORAGE
1,6 months shelf life if stored below 25 ℃ in cool, dry place, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.2,These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.
Click enlarge Image