Excellent Adhesiveness one component sealant/adhesive for junction box
0 likes
China [CN] Before The Curing
| Appearance | White Paste |
| Tack Free Time | ≤10 (min) |
| Extrudability | 5~11 (g/s,25℃) |
| Cure Time | 3~7(d) |
After the curing
| Relative Density | 1.40~1.45 (g/cm3) |
| Tensile Strength | ≥2.5 (MPa) |
| Break Elongation | ≥500 (%) |
| Shear Strength | ≥2.0 (MPa) |
| Hardness | 45~55 (Shore A) |
| The Temperature Range | -60~200 (℃) |
| Volume Resistivity | 2.6×1015 (Ω·CM) |
| Dielectric Strength | 20 (kV/·mm) |
| Dielectric Constant | 3.12 |
| Flame Retardant Grade | UL94 HB |
Sample: 300mL / tube, 25tubes / box.
APPLICATION RANGE
APPLICATION RANGE
 |
 |
 |
||
| Solar Lamp | Junction Box | Junction Box |
 |
 |
|
| The Aluminum Frame | Border |
PRODUCTION CHARACTERISTICS
PRODUCTION CHARACTERISTICS
|
Can be used in harsh environments for a long time The silicone sealant has the performance of superior
high and low resistance, excellent insulation, high
stability with thermal oxidation and ozone. It can be widely usesd in aerospace, automotive electronics, office equipment, construction and so on.
|
 |
 |
Effectively prolong the service life of electronic components Silicone sealant has superior thermal conduction and
bonding property.it not only can fixed the
electronic components, make heat transferring to the
heat sink, to prevent overheating of electronic
components to avoid resulting in break down,
which can improve the service life.
|
WISE CHOOSE
OUR ADVANTAGE
Our company is committed to providing superior solution about
silicone rubber for customers,we have long-term cooperation with
many famous customers of industry and listed company.
4 MAIN REASONS
QUAKE-PROOF PROPERTY
WATERPROOF PROPERTY
CORONA RESISTANT
LEAKAGE RESISTANT
INSTRUCTIONSMETHOD OF OPERATION
1. Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.
2. After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.
3. Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.
MATTERS NEEDING ATTENTION
NOTE
After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.
SPECIFICATION TRANSPORT
STORAGE
1. 6 months shelf life if stored below 25 ℃ in cool, dry place, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
2. These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.
3. Ensure that it is without abnormal before being used if the products exceeding retention period.
Click enlarge Image