converting waste plastic to fuel oil pyrolysis plant

본문 바로가기


Home > Product > converting waste plastic to fuel oil pyrolysis plant
Product
converting waste plastic to fuel oil pyrolysis plant
Posting date : Aug 11, 2016
Membership
Free Member Scince May 30, 2016
FOB Price
40000
Min. Order Quantity
1
Supply Abillity
50
Port
Qingdao
Payment Terms
fob
Package
wooden
Keyword :
Category
Contact
Bonnie
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
China [CN]
Brand Name
DY
Model Number
DY-8,DY-10,DY-20
HS-CODE
1510-00
Package & Delivery Lead Time
Package
wooden
Delivery Lead Time
30
Detailed Description
 Plastic waste to oil recycling machine
With its revolutionary waste plastic to fuel oil pyrolysis plant technology,  waste plastic to fuel oil pyrolysis plant Inc. has pioneered the development of a process that derives ultra-clean, ultra-low sulphur fuel which does not require further refining, directly from unwashed, unsorted waste plastics.
At waste plastic to fuel oil pyrolysis plant, we advocate environmental sustainability while energizing local economies through the creation of green jobs. We expect our waste plastic to fuel oil pyrolysis plant technology will transform waste management practices to redefine the recycling landscape and how we recycle tomorrow and into the future.
Our waste plastic to fuel oil pyrolysis plant technology has successfully overcome significant barriers in the fuel industry. Some of the key differentiators of our process are outlined below.Validation & Permitting
    Reputable independent labs have validated the waste plastic to fuel oil technology including process engineering and Conestoga-Rovers & Associates (emissions stack test).    waste plastic to fuel oil pyrolysis plant has been issued all necessary permits to operate by the New York State Department of Environmental Conservation (NYSDEC).     waste plastic to fuel oil pyrolysis plant has been issued an exemption from Air Permitting in the state where the first site will be located for the agreement with DOING Company.
Processor
    The processor requires only 4,500 sq. ft. of operating space.    Height requirement is approximately 20 ft.    Highly automated; very low operator to processor ratio.    Modular design allows for easy deployment.
    The P2O processor accepts unwashed, unsorted waste plastics. Optimal feedstock includes polyethylene and polypropylene.    The waste plastic to fuel oil pyrolysis plant process is permitted by the NYSDEC for up to 4,000 lbs. of plastic feedstock per machine per hour at the DOINGGROUP company, DY facility.
Process of the  waste plastic to fuel oil pyrolysis plant:
    The conversion ratio for waste plastic into fuel averages 86%.    Approximately 1 gallon of fuel is extracted from 8.3 lbs. of plastic.    The processor uses its own off-gases as fuel (approximately 10-12% of process output); minimal energy is required to run the machine.    Approximately 2-4% of the resulting product is Petcoke (Carbon Black), a high BTU fuel.    Emissions are lower than a natural gas furnace of similar size, and the quality of the emissions improve with increased feed rates.    Results from the final stack test performed by Conestoga-Rivers & Associates confirm that the processor emissions are well within the limits allowable under a NYSDEC air permit.    The process operates at atmospheric pressure, and is not susceptible to pinhole leaks and/or other problems with pressure and vacuum-based system.    The reusable catalyst is produced economically.    The fuel produced is refined and separated without the high cost of a distillation tower.
Resource Usage
    The  waste plastic to fuel oil pyrolysis plant processor is designed to use minimal amounts of external energy.    As well as being beneficial for the environment, this is also a significant factor in the commercial viability of the process.    Water is used for cooling only and usage is minimized through recycling the water in a non-contact closed loop. The water is not in contact with the process itself, keeping it clean and uncontaminated.    Only 53 kWh electricity is required to run the fans, pumps and small motors. No electricity is used in the transformation of the plastic to fuel.    Natural gas is only used on start-up to heat the reactor – once the processor is running, the reactor is heated with its own off-gases.    A facility-wide gas compression system governs natural gas usage throughout the entire production process.
Fuel Output Take one batch 10T waste tyre recycling pyrolysis plant for example:a. Crude oil: 45%*10t=4.5tb. Carbon black: 35%*10t=3.5tc. Steel wire: 13%*10t=1.3t
Contact:Ms Bonnie
Phone: +86-371-5677 1821
TEL:+86 158 9380 0169
Skype: bonniezhao2
www.doinggroup.com
Title : Name:Email:*TEL :Country:Inquiry * Please input your inquirys

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top