Addition cure encapsulating and potting compound

Product

Posting date : Aug 07, 2015

Click enlarge Image

Membership

Free Member Scince Jul 29, 2015

FOB Price

10.28-15.98 /KG

Min. Order Quantity

200 KGS

Supply Abillity

600 TON PER MONTH

Port

shenzhen

Payment Terms

T/T,L/C

Package

1KG,5KGS,20KGS,25KGS,200KGS

Keyword :

encapsulating and po

Category

PLASTICS & RUBBERS | Plastics a | Silicones | Silicones

Contact

Abbie

0 likes

Product Detail

Company Info

Quick Detail

Place of Origin

China [CN]

Brand Name

HongYe silicone

Model Number

HY-9055

HS-CODE

3910-00

Package & Delivery Lead Time

Package

1KG,5KGS,20KGS,25KGS,200KGS

Delivery Lead Time

5-15days

Detailed Description

Addition cure encapsulating and potting compound

1.Product Feature of Electronic Potting Silicone Rubber

HY 9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat conducting. It cures with both on room temperature and heated temperature. It has the feature of the higer temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC,PP,ABS,PVC, etc. and metal materials.

2.Typical Application of Electronic Potting Silicone Rubber

HY 9055 electronic potting silicone rubber could be applied to

- high powered electronics,

- DC or DC module and circuit board which requires heat dissipation and high temperature resistance.

-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

3. Technical Guidelines of of Electronic Potting Silicone Rubber

a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

b, Mixing Ratio: part A: part B = 1/1

c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80～100centigrade, the silicone will cure in 15 minutes; while in 25centigrade room temperature, the silicone will cure around 8 hours.

4.Notes of Electronic Potting Silicone Rubber

a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.

Organotin compound or Condensation silicone with organotin

Sulphur, sulfide and sulfur rubber materials.

Amine compounds as well as contains the amine materials.

Pewters solder flux

b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.

c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.

d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.

Technical Parameters of of Electronic Potting Silicone Rubber

Features		Part A	Part B
Before Curing	Appearence	Gray Fluid	White Fluid
	Viscosisty（25 centigrade cps）	2500±500	2500±500
Operation features	Mixing Ratio	1：1
	Viscosisty(after mixing) （cps）	2000～3000
	Operating Time（25 centigrade hr）	120
	Curing time （25 centigrade,min）	480
	Curing time（80 centigrade hr）	20
After Curing	Hardness（Shore A）	55±5
	Thermal conductivity [W（m·K）]	>=0.8
	Dielectric Strength（KV/mm）	≥25
	Permittivity（1.2MHz）	3.0～3.3
	Volume Resisivity（Ω·cm）	≥1.0×1016
	linear expansibility [m/（m·K）]	≤2.2×10-4
	Fire Resistance	94-V1

(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)

PACKAGE40Kg/pail as a set (Part A 20Kg + Part B 20Kg)

SHELF LIFE AND TRANSPORTATION

1. Twelve(12) months when stored at 24C in tightly closed original packages.

2. This kind of product is non-dangerous product, which could be transported as general chemicals.

3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

If you need more information,pls contact Abbie:

Tel:86-755-89311348

Fax:86-755-89948030A

Mob:86-18938867560

Mail:hyab at resinpu dot com

Facebook:HYJCY at SZRL dot net

YouTube:silicone0041 at gmail dot com

QQ:2355542681