CTC Volc Cleaner

본문 바로가기


Home > Product > CTC Volc Cleaner
Product
CTC Volc Cleaner
Posting date : Jul 01, 2015
Membership
Free Member Scince Jun 09, 2015
FOB Price
--
Min. Order Quantity
25 Ltr
Supply Abillity
--
Port
--
Payment Terms
D/P
Package
--
Keyword :
Category
Contact
Rajendra Tiwari
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
India [IN]
Brand Name
RXSOL
Model Number
RXSOL-20-2028
HS-CODE
2804-29
Package & Delivery Lead Time
Package
--
Delivery Lead Time
3 days
Detailed Description
CTC Volc Cleaner Product Description: RXSOL-20-2028 is a very strong cleaner, which can be used to soften up / remove baked on drying oils and used after animal and vegitable oils, fish oils, tall oils, tug oils etc .It is low toxic product with an exceptional solvency power on soil & oily matter. It is free from hydrocarbon solvents, Biodegradable minimizes the extreme hazards to personnel in handling materials.Suitable for cleaning of Lube oils Gas oil Kerosene Mineral oil Products. Phthalates paraffin's vegetable oils Odour intensive products. Using-Procedure: First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of usin RXSOL-20-2028 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method: Using CTC as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry. Re- Circulation Method: Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and CTC to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top