Radiation Electric Ceramic Bobbin Heater

Ceramic Bobbin Heater consists of 80/20 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end. Ceramic Bobbin Heater offers a large surface area to heat liquids or semi-solid materials such as water, oil, wax, fats, and bitumen. These heaters are mainly used for direct heating of air and indirect heating of liquids and gases where the element is fitted

 into a pocket in the process tank or system so that the element may be replaced without draining down the system or vessel.

 Topright Industrialmanufacture Ceramic Bobbin Heater for any voltage or wattage within manufacturing limits. Heater can be supplied with suitable mild steel or stainless steel pockets and mounting flanges or bosses is required.The element allows easy installation and handling. They are normally manufactured for horizontal mounting, but may be specially designed constructed for vertical installation. These are energy efficient as 100% of 

the heat is generated within the solution. The versatility is that this type of heating unit gives simple, low cost installation.

Applications: Barking Industry;High Temp Ovens;Furnances;Water Bath;Salt Bath,etc.

Ceramic Radiant Heater Photos:

Product name	ceramic bobbin hetaer
Insulation	alumina ceramic
Warranty	one year
Heating Wire	Fecral/ NiCr
Voltage	220-380v
Power source	electric
High Temperature	1200-1400 degree celsius
Applications	carburizing Furnance, oven and etc
Safety performance	perfect
Corrosion preventive	yes

 

Order Guide:

1. Inquiry-Professional quotation.

2. Confirm the price, lead time, artwork, payment term etc.

3. Topright sales send the Proforma Invoice with Topright seal.

4. Customer make the payment for deposit and send us Bank receipt.

5.Initial Production Stage-Inform the clients that we have got the payment,And will make the products according to your request,. After getting the sample or drawing approval, we inform that we will arrange the production & inform the estimated time.

6. If possible,middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again.

7. End Production-Mass production products photos will send to you for approval. You can also arrange the third party Inspection .

8. Clients make payment for balance and Topright Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term which we discussed. Inform the tracking number and check the status for clients.