Name
|
Technical data
|
Quantity
|
Remarks
|
EPS color - coated steel sandwich panel
|
50mm
|
1 set
|
The booth is made of color-coated steel sandwich panel. The thickness is 0.326mm and the weight is 12kg/m³.
Advantages: anti-fire etc.
The outside room wrap angles are using the wide angle type aluminium alloy./
|
Door
|
3000mm*2500mm W*H
|
1 Unit
|
The door is made of EPS sandwich panel. The edges are wrapped by high quality aluminum alloy. There are view windows on it(using wide angle type aluminum alloy metal sheet door)
|
Chassis Assembly
|
Length*width*height:6900mm*3900mm*300mm
|
1 set
|
The Chassis Assembly is welded by high quality steels. The legs of the bottom station are connected with 1.0mm thickened galvanized sheets. There are 2 rolls of steel grills in the size of 3*40. The operate plate on both sides are covered with anti-skid plates.
|
Fan
|
4kw
|
3 sets
|
The helicoids centrifugal fan is special designed for paint spry booth.
Volume of each set:18000m³/h
Advantages: low noise, explosion proof, etc.
|
The wind cabinet
|
2600mm*1500mm*3300mm
L*W*H
|
1Unit
|
Welded by high quality galvanized square pipes and angle steel
|
Electrical control box
|
AUTO
|
1 set
|
The electrical control equipments are composed of famous brand’s electrical components, including Delixi AC contactor, Ammeter and voltmeter. All those components are durable in use.
|
Filter cotton
|
600G
|
1 set
|
The filters cottons are made of 600G Stereo rubber filter cottons whose purify rate can reach over 95%.
|
Lighting system
|
220V 36W
|
1 set
|
We use Fusan T8 lighting system for lighting. There are 8 sets of lights. Each set has 3 tubes. The total tube number of the tubes is 24. We use the inclined tube lighting to make sure that the lights can reach every part of the booth.
|
ceiling girder
|
6900*3900
|
1 set
|
The framework is welded by 80*40mm square pipes for supporting. The reinforcement is made of galvanized sheet (thickness of the sheet is 1.0mm). All those can ensure the solidity.
|
Heating
|
CFR engine
|
1 set
|
We use Riello 14#CFR engine with the oil consumption of 7L-10L. The heat exchanger is welded of stainless steel sheets (thickness 1.2mm) and the heat exchange rate can reach more than 95%. The intake wind door is electrical door.
|
Skirt
|
7000*4000*300(length*width*height)
|
1 set
|
The skirt is welded by 1.0mm thick galvanized sheet with snow patterns on it.
|
Personal door
|
1800*700(height* width)
|
1 set
|
The edges of the door are wrapped with aluminum alloy with view windows on it.
|
Others
|
|
|
Wires, sealants, strip seals, handles, screw rivet, etc.
|