Ethernet version wireless temperature system
0 likes
China [CN] Features
• Low cost 433MHZ temperature monitor device, easy to build monitor network via multi-point monitoring
• Maximum radio range: 2KM(outdoor)
• Maximum 100 remote unit without repeater
• 3500mAh battery provide 3 million times data upload
• Indication and control accuracy 0.5C, high measurement.
• Accuracy ±1%FS (Depends on the sensor).
• Built-in digital filter reduce interfere, remote sensing unit with 64 communication channels, support FHSS technology to prevent signal interference and substitution
• Support temperature/humidity sensor, or integrate sensor
• Output and alarm format can be set by user.
• Software can read and analyze the monitor data.
Specification
|
Interface parameters |
|
|
Wired port |
RS485 industrial serial interface, for send the received data (Ethernet option) |
|
Wireless port |
MICO RACE wireless interface, For receiving the data of the wireless remote sensing unit |
|
Remote sensing unit management |
Maximum 100 unit, depending on the data upload frequency and wireless setting |
|
Wireless parameter |
|
|
Operating frequency |
Standard 434MHz |
|
240~930MHz option |
|
|
Channel |
64 |
|
Spread-spectrum mode |
Frequency hopping or fixed frequency (software configuration) |
|
Wireless rate |
2.4~256 kbps (software configuration) |
|
Communication distance(outdoor, antenna height 1.5 m) |
400M (7dbm,5mw) |
|
1300M (13dbm,20mw) |
|
|
2000M (16dbm,40mw) |
|
|
Communication protocol |
MICO RACE protocol, support routing, network |
|
Mechanical parameters |
|
|
Dimension |
82mm×60mm×27mm |
|
Shell material |
Aluminum (shielding) |
|
Surface treatment |
Oxidation (corrosion resistant) |
Click enlarge Image