Application:Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mouldFeature:1. Good characteristics of easy-operation2. Light viscosity and good flowability3. Low shrinkage 4. Favorable tension5. No deformation6. Favorable hardness7. High temperature resistance, acid and alkali-resistance and ageing resistance8. Food grade, non-toxicOperation:RTV625 is suitable for making moulds for small size products by pouring method;RTV630 is suitable for making moulds for small or medium size products by pouring and brushing method;RTV638 is suitable for making moulds for large size products by brushing method.Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayedDatasheet
Model |
Color |
Mixing ratio |
Pot life (mins) |
Demouled time (hrs) |
Hardness(A0) |
Tensile-strength (kgf/cm2) |
Tear-strength (kgf/cm) |
Viscosity (cps) |
Elongation (%) |
RTV E625 |
translucent |
1 : 1 |
30-60 |
4±1 |
25±2 |
35±2 |
25±2 |
6000±3000 |
≥400 |
RTV E630 |
translucent |
1 : 1 |
30-60 |
4±1 |
30±2 |
40±2 |
23±2 |
7000±3000 |
≥395 |
RTV E635 |
translucent |
1 : 1 |
30-60 |
4±1 |
35±2 |
47±2 |
22±2 |
8000±3000 |
≥470 |