Four slope monopole tower
It is single self-supporting pole, widely used in power transmission line or telecom project. Based on the number of segments, this monopole towers are classified as four …
A electrical transmission tower, also named electricity pylon is a tall structure, usually a steel lattice tower or monopole, used to support an overhead power line. They are used in high-voltage AC …
EHV Transmission Tower Lines
MEGATRO have rich experience in successfully handling the demands of EHV Transmission Lines where we also handle the job of approving tower designs and prototype. Here, w…
EHV Transmission Tower Lines
MEGATRO have rich experience in successfully handling the demands of EHV Transmission Lines where we also handle the job of approving tower designs and prototype. Here, w…
EHV Transmission Tower Lines
MEGATRO have rich experience in successfully handling the demands of EHV Transmission Lines where we also handle the job of approving tower designs and prototype. Here, w…
Suspension tower is where the conductors are simply suspended from the tower, in this case, the tower is supposed to carry a downward force, and a lateral force, but not a longitudinal force. These ma…
Strain tower is the tower support which resists net tension in the conductors and the conductors attach to the structure through strain insulators. For one strain or tension tower, loading on tower su…
A double-circuit transmission line has two circuits. Usually both circuits operate at the same voltage. In HVDC systems typically two conductors are carried per line, but rarely only one pole of the s…
132KV DOOR TYPE MONOPOLE TOWER
MEGATRO provide typical design for 132KV door type monopole which used in African power transmission line project, since year 2010, we had been mail supplier for NIGERI…
Dead-end steel tower, also named anchor tower or anchor pylon, uses horizontal strain insulators and occur at the endpoints of conductors. Such endpoints are necessary when interfacing with other mode…
MEGATRO can design and produce every type of dead-end and angel tower, which mainly used in power transmission line project. Dead-end and angle tower is used when the overhead power line terminates an…
An electricity pylon or transmission tower is a tall structure, usually a steel lattice tower, used to support overhead electricity conductors for electric power transmission. They are used in high vo…
Lattice Angle Towers for Power transmission
MEGATRO have a standard range of Lattice Towers to all our customers, which have three-legged, four-legged or every types to serve single circuit, double c…
Angle bar steel towers refer to tower & mast structure make of angle steels with bracing angle steel or other components. It can be classified as four-leg angle bar steel tower, triangular angle bar s…
A tower where conductor sections terminate at strain insulators, it is normally built stronger than suspension towers. Mostly used as angle tower when the line changes direction, in power transmission…
ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea