Characteristic of the products
PTFE pipe is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, PTFE has the best corrosion-resistance and dielectricity.…
We have the biggest press machine(9,600 ton) for producing the PTFE moulded sheet in China.
PTFE molded sheet is manufactured by molding with PTFE granular resin.PTFE is the most chemical resistance …
Characteristic of the products
There are two types of PTFE rod. The rod with diameter of 4~9mm is made by paste extrusion of dispersion polymerized PTFE resin; the rod with diameter of10~50mm is ma…
Characteristic of the products
PTFE fiber packing is a good sealing material. It is made by braiding expanded PTFE strips. It has low friction coefficient, abrasion-resistance, corrosion-resistance,…
Characteristic of the products
PTFE irregular shaped part and liner is made by post process or special treatment of PTFE material, which is difficult to be done by mould press method.
Main techni…
Polytetrafluoroethylene(PTFE)
membrane have tensile strength good, fine characteristics, such as viscidity,etc. high, insulating.
Use of the products
Lining,sealing and lubricating material and …
Characteristic of the products
PTFE resin is first moulded into work-blank and then skived.The PTFE resin skived sheet&tape are highly dielectric.Chemical resistant and not aging.They have a wide tan…
Characteristic of the products
PTFE washer is made of suspension PTFE. Compared with other plastics, it has better corrosion-resistance and excellent heat-resistance. It is now widely used as seali…
Characteristic of the products
PTFE pipe is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, PTFE has the best corrosion-resistance and dielectricity.…
We have the biggest press machine(9,600 ton) for producing the PTFE moulded sheet in China.
PTFE molded sheet is manufactured by molding with PTFE granular resin.PTFE is the most chemical resistance …
Characteristic of the products
There are two types of PTFE rod. The rod with diameter of 4~9mm is made by paste extrusion of dispersion polymerized PTFE resin; the rod with diameter of10~50mm is ma…
LD-Z1000 series crack sealer by its remarkable performance, the unceasing technological innovation, the outstanding customer service, sets up the body to the profession leading status. The many patent…
There are many models in teflon wire.
Model: AFT250
Rated temperature: -65--+260(Remark: 300 in short time, 2hr under 300 in experiment, not melting and shrinking when draw off wire)
Rated Voltage…
HST-H3 Heat Seal Tester seals the specimen to test the seal parameters of laminated films, coating paper and other heat sealing laminated films according to the requirement of relative standards. The …
Machine introduction
The machine is specialized in coating two-component selicone sealant and two -component polysulfiede sealant. the hydraulic control system is adopted .and when coating,the mach…
ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea