1、The machine is used to visually inspect, weigh and sort the positive (negative) of the Li-ion power battery.
2、The way to feed the electrode sheet is by the back and forth magazine lifting and the …
1、The machine is used to add a insulation sheet to the bottom of the battery cell and then put it into the steel shell after the cylindrical battery cell finish winding.
2、The battery cell and steel …
1、The machine is used to add a insulation sheet to the bottom of the battery cell and then put it into the steel shell after the cylindrical battery cell finish winding.
2、The battery cell and steel …
1、The machine is used to solder the negative leads of the cylindrical battery to the shell bottom automatically.
2、Thickness of shell bottom ≤0.3mm, thickness of negative lead ≤0.1mm.
3、Heat the cen…
1、The machine is used to roll groove on the cylindrical battery automatically.
2、Vertically upload and download the steel shell.
3、Use cam structure to control three rollers at the same time.
4、The…
1、The machine is used to fill electrolyte into the cylindrical attery semi-automatically.
2、The machine use imported PLC and man-machine interface centralized control. It is easy to operate and can s…
1、The machine is used to fill electrolyte into the cylindrical attery semi-automatically.
2、The machine use imported PLC and man-machine interface centralized control. It is easy to operate and can s…
1、The machine is used to laser solder positive leads to the cap of the cylindrical battery semi-automatically.
2、Feed material by hand, auto clean up positive leads, auto solder, auto inspect, auto b…
1、The machine is used to auto seal the cylindrical battery.
2、Vertically upload and download the steel cases.
3、The first sealing is through cam structure to control the sealer to run in radial dire…
1、The machine is used to test the internal resistance and open circuit voltage of the cylindrical Li-ion battery.
2、The system implement different levels of management.
3、The system has statistics f…
1、The machine is used to do aluminum-plastic membrane stamping and shaping for the soft pack Li-ion battery.
2、Specifications for products to be applied: L x W x H = (10-360) x (5-170) x (2-20)
3、Au…
1、The machine is used to heat and seal the side and top edges for the soft pack Li-ion battery automatically.
2、Specifications for products to be applied: L x W x H = (10-360) x (5-170) x (2-20)
…
1、The machine is used to do vacuum degassing and twice heat sealing for the soft pack Li-ion battery.
2、Specifications for products to be applied: L x W x H = (10-360) x (5-170) x (2-20)
Thickness…
1、The machine is used to cut, fold and heat the edges of the soft pack Li-ion batteries.
2、Specifications for products to be applied: L x W x H = (10-360) x (5-170) x (2-20)
3、The heater can fold an…
1、The machine is used to do hot pressing and
cold pressing after the soft pack Li-ion battery
filled and sealed.
2、Specifications for products to be applied:
L x W x H = (10-360…
ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea