Product Description
Model: 6FM105F (12V105AH/20HR)
Size: 507*109*223(total height: 238) mm
Terminal: B
Packing Qty: 1 PCS/CTN
650PCS/Container
Lead-time: 20 days for one contain…
Product Description
Electric Vehicle Series is designed for the applications to Electric Bike and Scooter, Wheelchair, Golf Cart, etc.
A stronger assembly pressure for Electric Vehicle battery …
This product have good solubility in some solvent,so,DF-2 PVDF powder is suitable for binders of lithium battery.
DF-2 own high dielectric constant,it have higher viscosity and binding properties in …
1, 3 star highlight LED lamp, CD, service life 100,000 hours,
2, material: the shell adopts advanced ABS material,
3, switch back button switches, flashlight:
4 and product size: 6 (long) the X3. 5…
1、The machine is used to visually inspect, weigh and sort the positive (negative) of the Li-ion power battery.
2、The way to feed the electrode sheet is by the back and forth magazine lifting and the …
1、The machine is used to add a insulation sheet to the bottom of the battery cell and then put it into the steel shell after the cylindrical battery cell finish winding.
2、The battery cell and steel …
1、The machine is used to add a insulation sheet to the bottom of the battery cell and then put it into the steel shell after the cylindrical battery cell finish winding.
2、The battery cell and steel …
1、The machine is used to solder the negative leads of the cylindrical battery to the shell bottom automatically.
2、Thickness of shell bottom ≤0.3mm, thickness of negative lead ≤0.1mm.
3、Heat the cen…
1、The machine is used to roll groove on the cylindrical battery automatically.
2、Vertically upload and download the steel shell.
3、Use cam structure to control three rollers at the same time.
4、The…
1、The machine is used to fill electrolyte into the cylindrical attery semi-automatically.
2、The machine use imported PLC and man-machine interface centralized control. It is easy to operate and can s…
1、The machine is used to fill electrolyte into the cylindrical attery semi-automatically.
2、The machine use imported PLC and man-machine interface centralized control. It is easy to operate and can s…
1、The machine is used to laser solder positive leads to the cap of the cylindrical battery semi-automatically.
2、Feed material by hand, auto clean up positive leads, auto solder, auto inspect, auto b…
1、The machine is used to auto seal the cylindrical battery.
2、Vertically upload and download the steel cases.
3、The first sealing is through cam structure to control the sealer to run in radial dire…
ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea