Global Trade leader ecrobot

본문 바로가기
Home > Product > METALS > | Iron and steel
METALS > Iron and steel
HS-CODE : 72
  • 7201-Pig iron and spiegeleisen in pigs blocks...
  • 7202-Ferro-alloys.
  • 7203-Ferrous products obtained by direct redu...
  • 7204-Ferrous waste and scrap remelting scrap ...
  • 7205-Granules and powders of pig iron spiegel...
  • 7206-Iron and non-alloy steel in ingots or ot...
  • 7207-Semi-finished products of iron or non-al...
  • 7208-Flat-rolled products of iron or non-allo...
  • 7209-Flat-rolled products of iron or non-allo...
  • 7210-Flat-rolled products of iron or non-allo...
  • 7211-Flat-rolled products of iron or non-allo...
  • 7212-Flat-rolled products of iron or non-allo...
  • 7213-Bars and rods hot-rolled in irregularly ...
  • 7214-Other bars and rods of iron or non-alloy...
  • 7215-Other bars and rods of iron or non-alloy...
  • 7216-Angles shapes and sections of iron or no...
  • 7217-Wire of iron or non-alloy steel.
  • 7218-Stainless steel in ingots or other prima...
  • 7219-Flat-rolled products of stainless steel ...
  • 7220-Flat-rolled products of stainless steel ...
  • 7221-Bars and rods hot-rolled in irregularly ...
  • 7222-Other bars and rods of stainless steel a...
  • 7223-Wire of stainless steel.
  • 7224-Other alloy steel in ingots or other pri...
  • 7225-Flat-rolled products of other alloy stee...
  • 7226-Flat-rolled products of other alloy stee...
  • 7227-Bars and rods hot-rolled in irregularly ...
  • 7228-Other bars and rods of other alloy steel...
  • 7229-Wire of other alloy steel.
    • Products 36,844 Result
    Monopole
    Nov 14 2013
    Three legged microwave communication angle steel tower Specification Details Avaivable Height: 5-100M Wind Pressure: 5-180 KM/H Material: Q345B/A572,minimum yield strength >=345N/mm2; Q235B/…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Qingdao Qingteng Interna...
    China [CN]
    Scince 0
    Free Member
    Telecom Monopole
    Nov 14 2013
    Three legged microwave communication angle steel tower Specification Details Avaivable Height: 5-100M Wind Pressure: 5-180 KM/H Material: Q345B/A572,minimum yield strength >=345N/mm2; Q235B/…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Qingdao Qingteng Interna...
    China [CN]
    Scince 0
    Free Member
    Lattice Tower
    Nov 14 2013
    Three legged microwave communication angle steel tower Specification Details Avaivable Height: 5-100M Wind Pressure: 5-180 KM/H Material: Q345B/A572,minimum yield strength >=345N/mm2; Q235B/…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Qingdao Qingteng Interna...
    China [CN]
    Scince 0
    Free Member
    Self Supporting Tower
    Nov 14 2013
    Three legged microwave communication angle steel tower Specification Details Avaivable Height: 5-100M Wind Pressure: 5-180 KM/H Material: Q345B/A572,minimum yield strength >=345N/mm2; Q235B/…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Qingdao Qingteng Interna...
    China [CN]
    Scince 0
    Free Member
    metal roof tile
    Nov 14 2013
    Lightweight and Strong,Durability,Economy,Recyclability,Aesthetically Pleasing,Easy Installation,Safety In Installation,Fire-proof,Premium Performance in Earthquake,Thaw-resistance, Weight Bearing, An…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Zhengzhou City Unites St...
    China [CN]
    Scince 0
    Free Member
    Galvanized steel coils
    Nov 14 2013
    Base Material:　Hot dip Al-Zinc coated steel sheet (AZ) 　　　　　　 　Hot dip galvanized steel sheet (HDG) Coating Mass:Zinc:　 60-275g/m2, Al-Zn: 60-180g/m2. Thickness:　0.21-1.55mm Width:　600-1250mm Int…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Zhengzhou City Unites St...
    China [CN]
    Scince 0
    Free Member
    Pre-painted steel coils
    Nov 14 2013
    Base Material:　Hot dip Al-Zinc coated steel sheet (AZ)， Hot dip galvanized steel sheet (HDG) Coating Mass:　Zinc: 60-275g/m2, Al-Zn: 60-180g/m2,. Thickness:　0.21-1.55mm Width:　600-1250mm Internal D…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Zhengzhou City Unites St...
    China [CN]
    Scince 0
    Free Member
    BW - 600 mud pump
    Nov 08 2013
    BW - 600 mud pump Reciprocating mud pump is horizontal triplex single acting piston pump. Deepest hole depth according to use can adjust at will, can and 1800 m drilling rig, cement pump infusion is …
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Jining Hengwang Mining M...
    China [CN]
    Scince 0
    Free Member
    die casting
    Nov 08 2013
    Andas-mold, founded in early 2003, is an integrated OEM manufacturer and product development firm with cost-effective idea, top quality, fast responsiveness. We specialized in tool making, injection m…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Andas Industrial Co.,Ltd
    China [CN]
    Scince 0
    Free Member
    tunnel mortar spraying machine construction spraying machine cement wa...
    Jan 27 2014
    3D wall mortar spraying machine Product Introduction mortar spraying machine is widely used to spraying concrete mixer on the wall, tunnel, channel, etc. Sparying concrete mixer(sand, water, concret…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Shandong China Coal Indu...
    China [CN]
    Scince 0
    Free Member
    CNC hydraulic plate punching marking machine
    Nov 08 2013
    CNC hydraulic plate punching marking machine CNC plate punching machine , Hydraulic punching machine ,CNC punching machine Features : 1)Main frame is fortified C-type welding structure, with stron…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Jinan Supertime Technolo...
    China [CN]
    Scince 0
    Free Member
    CNC angle lines for punching machine
    Nov 08 2013
    CNC angle lines for punching marking shearing machine 1) With high working efficiency ,45 times per minutes 2) PLC +NC control system 3) Upright press 4) Linear guideway make the angle feeding…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Jinan Supertime Technolo...
    China [CN]
    Scince 0
    Free Member
    CNC band saw machine for beam
    Nov 08 2013
    CNC Band Sawing Machine Model DJ1250 A. Application It was mainly used for cutting H Beam, Slot steel, Box beam and bar steel with characteristics of easy operation, high efficiency and strong p…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Jinan Supertime Technolo...
    China [CN]
    Scince 0
    Free Member
    CNC h beam 3D drilling machine
    Nov 08 2013
    CNC DRILLING MACHINE FOR H-BEAM MODEL SWZ1250 A. Main Composing Parts This machine is composed of mainframe, hydraulic system, feeding conveyor unit & electrical control system etc. B. Product fea…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Jinan Supertime Technolo...
    China [CN]
    Scince 0
    Free Member
    Magnesium Ingot
    Nov 08 2013
    Usage: - The high temperature at which magnesium burns makes it a useful tool for starting emergency fires during outdoor recreation. Other related uses include flashlight photography, flares, pyro…
    HS-CODE : 72-
    Category : METALS | Iron and steel
    Hebei Donghua Industrial...
    China [CN]
    Scince 0
    Free Member
    ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
    Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
    About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
    Top