EA (End Suction Centrifugal Pump)

Selling Leads Detail

Company Info

 

The EA pumps series comply fully to the European standard DIN24255. This standard covers both performance and dimensions. The EA pumps series are used for pumping cleanwater or liquids with characteristics similar to water. They are suitable for plants, mines , city water supp lies , air-conditioning coolers , firefighting system and irrigation. For a pump of same the model, the performance can be changed by trimming the outer diameter of the impeller. Only four shafts are required to cover the total range, and this gives many common interchangeable parts for pumps fitted to the same shaft. Just like the shaft, the bearing house has only four sizes for the whole series. The pump has a back pull-out design, and when a suitable spacer coupling is fitted to a direct coupled unit, the casing and motor can remain in position while all other pump parts can be removed for simple and quick maintenance. Design: Horizontal, Single-Stage Volute Casing pumps with dimensions and nominal ratings standard to DIN24255. Type: End Suction Centrifugal, back pull-out Flange: DIN2332 PN 10RF Direction of Rotation:-- Clockwise as viewed from the drive side. Material: Casing - Cast Iron and Ductile Iron standard; optional Stainless Steel Impeller - Bronze standard, optional Cast Iron & Stainless Steel Shaft - AISI420 standard, optional AISI304 & AISI316 Shaft Seal - Mechanical Seal standard Carbon-Sic/Vinton (optional) Optional Gland Packing; Operating Range: Flow Rate(Q) : 2 -1100 m

Basic Company Information

Eifel Pump (Fuzhou) Corpn., Ltd

Company Advantage

Detail Company Introduction