1 million times hydraulic cartridge valve, details in spring, AAK 3 details surpasses original manufacturer

China [CN]

A few days ago, Titan, an old customer from Türkiye, sent me 6 samples of hydraulic cartridge valves. According to his description, there were 3 batches of the valves purchased from the original hydraulic cartridge valve manufacturer, and 2 batches of valves had abnormal service life. Some hydraulic cartridge valves had a service life of more than 1 million times, while some hydraulic cartridge valves had only about 700,000 times. However, no problem could be found in the selection of materials or accuracy of hydraulic cartridge valves. The original manufacturer of the hydraulic cartridge valves is also uncertain about the root cause of the problem, which has made Titan very upset.

There are various possible reasons for unstable service life, such as material selection, machining accuracy, internal structure of the valve, and accessories. According to our testing, the valve provided by the original hydraulic cartridge valve manufacturer is unstable due to the quality of the spring, which affects the service life of the hydraulic cartridge valve. Titan mentioned that the Korean piano steel wire material used by the original hydraulic cartridge valve manufacturer should have a service life of no less than 1 million times. Yes, it is the basic standard for high-quality hydraulic cartridge valves to use piano steel wire. However, there are details on where the spring is processed and how to test its service life. Most hydraulic cartridge valve manufacturers just purchase springs from processing plants and then assemble them directly. Once there is a quality problem in the spring factory, it also affects the hydraulic cartridge valve manufacturers.

Hydraulic cartridge valve manufacturer AAK controls the quality of springs through material selection and testing, based on 3 details:

1. The selection of piano wire is inevitable.

2. The length of the spring must be measured using a caliper, with the unit focused in millimeters.

3. The service life of the spring is controlled by specialized equipment.

As shown in the video, hydraulic cartridge valve manufacturer AAK requires each batch of springs to undergo durability fatigue testing using a spring life testing machine. After the spring is inserted into the fixture, select the working mode in the program first, and then set 1 million tests to set the amplitude and frequency of the spring. Adjust the distance between the upper and lower pressure plates according to the length of the spring. After starting the equipment, the reciprocating motion of the connecting rod drives the compression work of the spring. The time and frequency of spring operation can be tracked on the screen at any time. If the spring is less than 1 million times, the program will automatically remind.

AAK hydraulic cartridge valve has a service life of over 1 million times, which is the most basic requirement. You can also give it a try!

AAK HYDRAULIC CARTRIDGE VALVES (750) 2024-01-02

https://www.aakindustry.com/info-detail/hydraulic-cartridge-valves-aak750