1 for 5 testing equipment, AAK solved the delivery time problem that Mablevi encountered on hydraulic pressure control valve

China [CN]

Mablevi is from Turkey. In early November, he left a message on the hydraulic cartridge valve manufacturer AAK website: Can you deliver 200 pcs of hydraulic pressure control valves within 20 days, equivalent to HydraForce RV08-22? After communication, it was learned that Mablevi encountered delivery issue with RV08-22 purchased from other hydraulic cartridge valve manufacturers and had to repurchase it. Mablevi requires each hydraulic pressure control valve to be tested on a test bench. After 3 days of sourcing, no hydraulic cartridge valve manufacturer was able to accept the order because testing was time-consuming. Mablevi was very anxious.

Mablevi requires 100% inspection and pays close attention to quality. This is the type of customers we like. I felt Mablevi's urgency, and after communicating with the workshop, it was found that there was enough time in the production process. Most hydraulic cartridge valve manufacturers should be able to produce 200 pcs of RV08-22 hydraulic pressure control valves in 20 days, but do not have enough time for testing. In the testing stage, AAK has a 1 for 5 testing bench, which is our confidence in accepting this order and also the advantage of hydraulic cartridge valve manufacturer AAK in testing.

5 years ago, we upgraded our testing bench. From testing one hydraulic pressure control valve in the past, we can now test 5 hydraulic pressure control valves at once. This testing bench has 5 independent testing oil circuits that do not interfere with each other, and can be tested together. Mablevi specifically reminded us that each hydraulic pressure control valve must be tested. I took a video of our quality inspection department testing solenoid valves on site and showed it to Mablevi. From the video, we can see how hydraulic cartridge valve manufacturer AAK can test 5 solenoid valves at once. Similarly, this test bench can also be used to test the hydraulic pressure control valves required by Mablevi. The QC in our quality control department sequentially installs 5 valves into the valve blocks, tightens them, and then puts the matching coils onto the magnetic housing, tightens the top nut, and connects the coils to the wiring port of the test bench. QC starts the test bench. During the opening stage, each pressure gauge on the test bench displays pressure data. The key of this process is that QC needs to close and activate the oil inlet control button at least 3 times to avoid blind spots, and any abnormal flow and pressure pointer mismatch.

Today, we received the PO for 200 pcs of RV08-22 hydraulic pressure control valves from Mablevi. This is the first time Mablevi has placed an order with AAK. Thanks for his trust in AAK. Hydraulic cartridge valve manufacturer AAK has advantages in production efficiency compared to other hydraulic cartridge valve manufacturers in Ningbo China:

1. AAK is skilled at upgrading local device functions.

2. The manufacturing quality of hydraulic cartridge valve manufacturer AAK is comparable to that of HydraForce and stable. AAK dares to purchase various raw materials in bulk.

3. 100% pass the test bench and can test 5 hydraulic pressure control valves at once.

AAK hydraulic pressure control valve, in terms of detection, 1 for 5, you can also give it a try!

AAK HYDRAULIC CARTRIDGE VALVES (730) 2023-12-05

https://www.aakindustry.com/info-detail/hydraulic-cartridge-valves-aak730