160W car power inverter 18W QC3.0 charger 24W 3*usb sockets 12V 110V 60Hz
Specification:
Input voltage:DC11-14V
No-load current:≤0.4A
Case temperature:≤50℃(full load)
Cooling:Fan(the fan is work at a low speed When the machine is turned on, and at fast speed when temperature around 38 degrees)
Switch:Control inverter part except USB
Continous power:200W(power inverter 160W+QC3.0 18W+USB24W)
Output voltage:110VAC±10%
Frequency:60HZ±2HZ
Wave:Modify sine
Efficiency:88%(MAX)
Over-load protection:200W±30W
Temperature protetion:65±5℃(Internal ambient temperature)
Low-voltage protection:10.0V±0.5V
Over-voltage protection:15.5V±0.5V
Short-circuit protection:Yes
LED light:work status
Alarm function: When the inverter over temperature, overload, over voltage, low voltage, short circuit , it will sound with the alarm
USB1 USB2 USB3 output parameters
Power on/off mode: When the cigarette connected, they start working, and stop working when they are disconnected.
USB output voltage: 4.75~5.20V (full load)
Output rated current: 4.8A (MAX)
Output voltage ripple: ≤150mV
Output overcurrent protection: ≤ 5.8A
Output short circuit protection: yes
USB recognition mode: automatic identification
USB4 output parameters
Power on/off mode: Switch on/off mode: When the cigarette connected, they start working, and stop working when they are disconnected.
USB output voltage: 4.75~5.20V (full load)
Output rated current: 5V3A, 9V2A, 12V1.5A (12V output requires input voltage more than 12.5V)
Output voltage ripple: ≤150mV
Output overcurrent protection: ≤3.8A
USB recognition mode: automatic identification Support QC3.0
Note: All the above parameters are measured at an ambient temperature of 25 ° C.