What factors will affect the cutting speed of green cutting disc?

With the development of the abrasives industry, the use of cutting sheets is now more and more extensive, but many people may confuse the cutting sheets with the cutting of the cutters. In fact, it belongs to the grinding wheel and is a kind of abrasive tools. Good cutting blades must have a good cutting speed. Today, Aurora abrasives will talk about which factors will affect the cutting speed of the green cutting disc.

The cutting speed of the green cutting disc is the feeding speed of the sawed stone. Its speed affects the sawing rate, the force of the saw blade and the heat dissipation of the sawing area. Its value should be selected according to the nature of the stone to be sawed. set. The sawing of fine-grained, relatively homogeneous granite can increase the feed speed appropriately. If the feed speed is too low, the diamond edge is easily soothed. However, when sawing a coarse-grained structure with uneven hardness, the cutting speed of the cutting piece should be reduced. Otherwise, the saw blade vibrates and the diamond is broken and the sawing rate is lowered. The cutting speed of sawing granite is generally selected within the range of 9m~12m/min.