What should pay attention to when transporting the105*1.2*16 cutting disc?

Users who have used the 105*1.2*16 cutting disc know that when using the cutting piece, not only the operation is important, but also the transportation of the cutting piece is an important part, because the cutting piece is a relatively brittle material, generally Abrasives, binders, and pores, these three parts are often referred to as the three elements of the cutting sheet. Today, taking the 105*1.2*16 cutting disc as an example to give you a summary of the problems that the cutting piece needs to pay attention to when transporting?

1. The cutting piece should be stored in a dry place at room temperature not lower than 5 degrees Celsius.

2. The long-distance transportation of the cutting piece should be properly packed with wooden boxes or wicker baskets, and the abrasive tools should be separated by soft materials such as straw and sawdust to prevent collision and impact.

3. The cutting piece should not be placed in a damp or frozen place. It should not be in contact with oil. The cutting piece should not be in contact with alkali, otherwise, it will reduce the strength and grinding force of the grinding tool.

4. The storage time of the cutting piece should not exceed one year. Overdue cutting tablets should be inspected for strength before use. The modified cutting piece should also be used after the re-spinning test.

5, the cutting piece should be placed according to the specifications, the store is marked with signs to avoid confusion and errors, the placement method should be determined according to the size of the grinding. Large or thick diameter cutting blades shall be placed upright and slightly inclined. Thinner and smaller grinding wheels shall be placed flat, but not too high, and a full iron plate shall be placed underneath it to prevent cutting pieces. Deformed or broken.