Tobee | Warman |
Power P (kw) |
Capacity Q (m3/h) |
Head H (m) |
Speed n (r/min) |
Eff. η (%) |
Impeller dia. (mm) |
Max. particles (mm) |
Weight (kg) |
TP(R)300TV | 300TV-SP(R) | 22--200 | 288-1267 | 6-33 | 350-700 | 50 | 610 | 65 | 3940 |
Faults | Reason | Removal |
Pump fails to discharge any liquid. | Incorrect direction of pump rota- tion and impeller worn.Suction pipe blocked | Check direction of rotation and replace anew impeller |
Power consumption on shaft is excessive | Rotating component is rubbing on a stationary part.Bearing worn.Drive belt tension too tightFlow rate too largePump speed and ratio too high.Misalignment or unparallel of drive shaft and pump shaft. | Removal the rubReplace the bearingAdjust beltModify the pump duty and speed.Adjust drive and pump shaft |
Bearing is over hearing | Lubricants too much or less.Containing impurities in the lubricantBearing worn. | Lubricating as requirements.Replace clean lubricant.Replace new bearing. |
Bearing has short life. | Misalignment or unparallel of drive and pump motor.Shaft bent.Impeller unbalanced due to wearForeign object entered into the bearing or insufficient lubricationIncorrect procedure followed in fitting bearings. | Adjusting drive and pump shaft.Replacing shaft.Remove rubbing and replace new impellerClean the bearing.Replace or refit the bearings. |
Pump vibrates or is noisy. | Bearings worn.Impeller unbalanced.Air entered into suction pipe or blocked.Flow rate is none—uniform and pump not primed. | Replaced by new bearings.Replaced by new impeller.Discharge air and remove block.Improve on the pump feeding. |
Tobee® TP300TV Sump Slurry Pumps are widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet crushers, SAG mill discharge, Fine Primary Mill Grinding, Tailings, Secondary Grinding, Bottom/fly ash slurries, Pulp And Paper, Food Processing, Cracking Operations, Gypsum slurries, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond Dredging, Heavy Refuse Removal, Larger Particle Or Low NPSHA Applications, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Iron Ore, Cooper, Diamond, Aluminum oxide, Gold, Kaolin, Phosphorite, Steel, Palm, Suger, Chemical, Power, FGD, Frac Sand Blending, Waste water, Flotation etc.
Email:Sales2@tobeepump.com,web:www.tobeepump.com