New Mimaki CF3 Series High Speed Flatbed Cutting Plotter and Router - Model CF-1610, CF3-1631
Singapore [SG] Supports both small and large size media up to 1.6m x 3.1m (63" x 122"). Even difficult acrylic or aluminum composite panels can be cut with consistently high accuracy. User exchangeable cutting heads to suit a wide range of conditions widen your possibilities greatly.※Your Mimaki dealer or Mimaki sales office will advise you of the suitability of specific materials that you would like to cut.
| CF3-1631 | Effective cut area/1,600 x 3,100mm (63" x 122") |
|---|---|
| CF3-1610 | Effective cut area/1,600 x 1,000mm (63" x 39.3") |
The M head is used exclusively for router cutting. With a high-speed spindle, rigid materials such as acrylic or aluminum composite panels can be cut easily, even up to 50mm in thickness.The cut depth control function enables multiple cuts for especially thick materials.
Spindle speed: 60,000rpmTool chuck: collet typeMaximum tool diameter: 6mm (0.24")Main materials: rigid materials such as acrylic andaluminum composite panelsSet tool: endmill
Thick materials up to 20mm (0.78") can be cut with the reciprocating cutter. The R1 head is equipped with a material-holding unit, which prevents cut materials from lifting. The cutting head is suitable for cutting corrugated boards and foam materials.
Maximum reciprocating speed:approximately 10,000 strokes/minStroke: 1mm *dependent on the cutter and holder usedMaximum cut depth: 20mm *dependent on the cutter andholder usedMain materials: cardboard, corrugated board, foam materialSet tool: swivel cutter/pen, reciprocating cutter creasing tool,high-pressure tangential cutter
The tangential cutter steers the blades as it cuts. With two types of tangential cutters and fine cut pressure settings a wider range of materials can be cut successfully. Various cutting tools are provided for a range of materials. Any suitable blade available on the market, can be mounted.
Vertical tool force: low-pressure head:300-1,500,high-pressure head:1,000-5,000gMain materials: reflective sheet, rubber, industrial materialsSet tool: swivel cutter/pen, tangential cutter creasing tool andhigh-pressure tangential cutter
The CF3 series cuts printed materials with high accuracy to satisfy your needs and creativity. Mimaki's latest cutting technology provides versatile solutions for a wide range of cutting jobs.
The patented Mimaki color photo sensor on CF3, reads registration marks that are printed on the media to obtain more precision by automatic correction of alignment and distances.
By recognizing the difference between the color of the media and of the registration marks, the position of the registration marks is correctly detected regardless of the color of the media.
The registeration marks can be located easily. The light pointer can also be used to precisely position the media on the bed.
By detecting 4 registration marks and adjusting alignment and distance, precise contour cutting of complex shapes is enhanced.
The vacuum area is divided into zones, 6 for the CF3-1631 and 2 for the CF3-1610. The zones can be separately activated to suit the media size. The vacuum system also incorporates a blower function for easier positioning of heavy media.Easily hold down different size materialsAccording to the size of the media a number of zones can be activated to optimize hold down for any size material.The blower function enables easy handling of heavy materials. The blower function (reversing the air stream) can be activated to easily position, replace and move heavy media.
Click enlarge Image