0.75HP CE Certificated JET80S Electric Water Pump

1 .Working conditions:

Max temperature of fluid up to:      50℃

Max ambient temperature up to:        40℃

Max Pressure:                        8bar

2. Structural characteristics:

Pump casing:        Cast Iron

Impeller:            ABS/Brass/Noryl

Diffuser:            Noryl/PPO/ABS/Cast iron

Motor Housing:       Aluminum

Pump-motor adaptor:  Aluminum/Cast iron

Mechanical seal:      Stainless steel(graphite to ceramic)

Shaft:               45# steel or stainless steel

Bearing:             SKF/NTN/NSK/China

Insulation class:       B and F

Protection class:       IP44 and IP54

INSTALLATION AND APPLICATIONS:These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump components.They are extremely reliable,economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-size tanks, watering gardens,etc.These pumps should be installed in a covered area. protected against the weather. PERPORMANCE:The wide range of pump in the JET-M series satisfied the most varied requirements with features such as:- high heads with respect to power required.-flat operating and power absorption curves, giving moderate curve variations with respect to large variations in delivery demand.-high tolerance of the presence of entrained air in the fluid to be pumped.-suction capacity up to 9 meters